Jump to content


Photo

Please Help Me Someone


  • Please log in to reply
4 replies to this topic

#1 moy24

moy24

    Feet Under The Table

  • Budding Enthusiast
  • PipPipPipPip
  • 411 posts
  • Name: M
  • Ford Model: FOCUS 2.0 TITANIUM/ST REPLICA
  • Year: 2006
  • Location: Suffolk

Posted 06 April 2012 - 06:37 PM

Basicly i have a problem i have a 2006 focus 2.0. il try to expalin best as i can. i have problem with part of te dipstick, the part that goes into the block is damged and i need to remove it but i cant find away to take it off i heated it with a heat gun but with no luck i took the dipstick tube off which had 1 bolt but its not the part im taking about there is a bit that is just pushed into the block then the dipstick tube is bolted onto so it the bit thats pushed into the block please help.

Have something to contribute?

Sign in or register to start a topic...



Sign up to FOC Premium Membership To Remove These Ads

#2 dezwez

dezwez

    Dezwez

  • True Ford Enthusiast
  • PipPipPipPipPip
  • 5,070 posts
  • Name: Derek
  • Ford Model: ford focus 1.8 zetec mk 2.5
  • Year: 2008
  • Location: Cambridgeshire

Posted 06 April 2012 - 08:40 PM

try drianing the oil out and remove the sump see if that works

#3 moy24

moy24

    Feet Under The Table

  • Budding Enthusiast
  • PipPipPipPip
  • 411 posts
  • Name: M
  • Ford Model: FOCUS 2.0 TITANIUM/ST REPLICA
  • Year: 2006
  • Location: Suffolk

Posted 06 April 2012 - 09:04 PM

try drianing the oil out and remove the sump see if that works


no wont work mate there no oil in there anyway. it the dipstick tube the end that goes into engine i thing it just a o ring there but i just cant seem to pull the tube out looked on the net and some people say just wiggle about n should pull out but it just to toght

#4 jeebowhite

jeebowhite

    Resident Loon

  • Super Mod
  • 20,663 posts
  • Name: James
  • Ford Model: Sea Grey Mondeo MKIV 1.8TDCi 140ps Zetec
  • Year: 2007
  • Location: Kent
Contributor

Posted 11 April 2012 - 01:09 PM

so the bottom of your dipstick is stuck somewhere in the engine block?how far out are you able to pull the dipstick before it catches??

#5 moy24

moy24

    Feet Under The Table

  • Budding Enthusiast
  • PipPipPipPip
  • 411 posts
  • Name: M
  • Ford Model: FOCUS 2.0 TITANIUM/ST REPLICA
  • Year: 2006
  • Location: Suffolk

Posted 15 April 2012 - 06:30 PM

DONE i sorted it it just needed pulled off but took 30 min to do as it was jammed in heated it with a heat gun and used a grip tool thing and it poped out


Not what you're looking for?

Register now, we have a huge community of enthusiasts to answer any questions you might have



0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users