Jump to content
Do Not Sell My Personal Information


Bonnet Wont Open 52 Reg 1.4 Petrol


alf1956
 Share

Recommended Posts

i have a 52 plate 1.4 petrol fusion&the bonnet catch will not open the bonnet,it feels as though if i pull the catch any harder it will break.i have tried to press on the bonnet with somebody working the catch but that was no good,any ideas please ???

Link to comment
Share on other sites


you can open it from underneath the car theres loads of room to get to the catch

Link to comment
Share on other sites

  • 2 weeks later...

I had the same problem the other week, what I did was take the plastic off from around the pull handle then unbolted the handle from the side wall and took the cable out from the mechanism and by pulling it hard with pliers managed to free the bonnet release. When opened I gave the bonnet lock a good spray with WD40 and worked it a few times without putting the bonnet down. Hope this helps

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share




×
×
  • Create New...

Forums


News


Membership