Jump to content


Photo

Rattling/knocking In Engine 2004 Tdci


  • Please log in to reply
9 replies to this topic

#1 flooper

flooper

    Member

  • New Member
  • PipPip
  • 18 posts
  • Name: Phil
  • Ford Model: 130 Mondeo TDCi 6 speed
  • Year: 2004
  • Location: Somerset

Posted 07 May 2012 - 04:11 PM

Hi all,

Recently bought a 2004 (04 plate) 2.0 ltr TDCi hatchback and it's got a rattling/knocking when idle and sometimes when in a low gear going slowly.

Looking at the engine, I can't see anything obvious that is rattling. When idle, if I put my foot on the clutch then the noise completely goes. Having a bit of a look through this forum can this be related to the DMF? If I rest my foot on the clutch pedal, but with no pressure on it, then I can feel the vibrations of the knocking too - I don't feel it on the other pedals.

I do hear the noise when in 2nd gear and going very slow around a car park for example.

Any help and avice with this would be much appreciated. I'm not very mechanically minded, but I am learning slowly!

Would rather get help and tips from here first rather than taking it to a mechanic that will charge me the earth to probably just look at it!!

Thanks in advance

Phil

Have something to contribute?

Sign in or register to start a topic...



Sign up to FOC Premium Membership To Remove These Ads

#2 flooper

flooper

    Member

  • New Member
  • PipPip
  • 18 posts
  • Name: Phil
  • Ford Model: 130 Mondeo TDCi 6 speed
  • Year: 2004
  • Location: Somerset

Posted 08 May 2012 - 04:28 PM

Ok, had someone look at it today and it is indeed the dual mass flywheel.

It also needs to have the rear subframe replacing as well - not sure if this would be an MOT failure or not?

I was just wondering what people's thoughts were - is it worth spending the money on getting it all done? It's got 170,500 on the clock but it does drive very nicely. Or is it better off selling it for a loss!?

#3 s.jsutton

s.jsutton

    Settling In Well

  • Budding Enthusiast
  • PipPipPip
  • 82 posts
  • Name: simon
  • Ford Model: mondeo tdci 130 ZETEC S
  • Year: 2002
  • Location: Greater London

Posted 11 May 2012 - 01:12 PM

Would'nt have thought the subframe needs replacing unless it is particularly corroded, probably the subframe bushes need doing and they would be an mot failure, no clue of the cost of this.
DMF is a pricey one, you would get the clutch done at the same time, probs £500 - £700 quid.

Regards

#4 flooper

flooper

    Member

  • New Member
  • PipPip
  • 18 posts
  • Name: Phil
  • Ford Model: 130 Mondeo TDCi 6 speed
  • Year: 2004
  • Location: Somerset

Posted 11 May 2012 - 07:03 PM

Thanks for the reply - the guy said to me that the subframe bushes were really knackered. Said it would be easier to replace the whole subframe. Not sure if this is true or whether he is just trying to get some extra cash in his pocket!! Quoted me about £300 including labour to do it.

What's the pros and cons on getting a DMF conversion kit to take it to a solid state one? Is it worth it?

#5 s.jsutton

s.jsutton

    Settling In Well

  • Budding Enthusiast
  • PipPipPip
  • 82 posts
  • Name: simon
  • Ford Model: mondeo tdci 130 ZETEC S
  • Year: 2002
  • Location: Greater London

Posted 14 May 2012 - 10:53 AM

MY mechanic mate said he thought they were a good idea when he first heard of them, but since then he has heard / found that they can cause a lot of problems.
I would steer clear, ford would not have designed them with dual mass if they did'nt need to.

#6 flooper

flooper

    Member

  • New Member
  • PipPip
  • 18 posts
  • Name: Phil
  • Ford Model: 130 Mondeo TDCi 6 speed
  • Year: 2004
  • Location: Somerset

Posted 30 May 2012 - 06:46 AM

Well, I ended up selling this car - for a loss, but that was expected. Was genuine to the person I sold it to, but he was happy enough as he wanted a bit of a project to do and was more than happy to invest his time and money into doing it!

I ended up buying another Mondeo yesterday - this time a 53 plate 130 TDCi 6 speed and for a decent price too.

Thankfully, I told a friend that I was going to have a look at it and he said that he knew someone that worked for the RAC (wish I had known this before I looked at the other one!). He came and had a look at it for me, connected it to his laptop etc and found no faults, and said that it was a very decent car at a very decent price.

So, one happy Mondeo owner now!

#7 s.jsutton

s.jsutton

    Settling In Well

  • Budding Enthusiast
  • PipPipPip
  • 82 posts
  • Name: simon
  • Ford Model: mondeo tdci 130 ZETEC S
  • Year: 2002
  • Location: Greater London

Posted 30 May 2012 - 11:35 AM

post some pic's then.

#8 flooper

flooper

    Member

  • New Member
  • PipPip
  • 18 posts
  • Name: Phil
  • Ford Model: 130 Mondeo TDCi 6 speed
  • Year: 2004
  • Location: Somerset

Posted 03 June 2012 - 04:29 PM

At the moment it's nothing special. I certainly need to get some alloys for it, that is no major rush.

Posted Image

Posted Image

#9 Stoney871

Stoney871

    Resident Peacekeeper

  • Super Mod
  • 18,172 posts
  • Name: Clive
  • Ford Model: 2015 Focus ST3 250BHP
  • Year: 2015
  • Location: Devon
Contributor

Posted 03 June 2012 - 05:03 PM

Looks a nice tidy vehicle.
I'm sure you will be tempted by some mods after being on this forum for a couple of weeks.

#10 flooper

flooper

    Member

  • New Member
  • PipPip
  • 18 posts
  • Name: Phil
  • Ford Model: 130 Mondeo TDCi 6 speed
  • Year: 2004
  • Location: Somerset

Posted 03 June 2012 - 05:48 PM

Absolutely! Have already eyed up a couple!!

Have something to contribute?

Sign in or register to start a topic...


Not what you're looking for?

Register now, we have a huge community of enthusiasts to answer any questions you might have



0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users