• Share Your Car Experience
      Share Your Car Experience
    • 1000's Of Fords For Sale
      1000's Of Fords For Sale
    • Huge Range of Ford Parts
      Huge Range of Ford Parts
    • Get Your Club gear
      Get Your Club gear
    • Savings Up to 15% Off For Members
      Savings Up to 15% Off For Members
    • Join Premium & Save
      Join Premium & Save

AdBlock Warning

Parts of this website do not function properly with AdBlock enabled on your device. To get the best user experience on our website, please disable Adblock for this website (domain) on your browser.


juliec

Regassing Air Con With Kit

Recommended Posts

Hello All,

First post so hope I've put it in the right place!!

I have recently bought a kit (Halfords) to re-gas my air conditioning. On the can they give a website address where details of re-gassing points are given. Unfortunately, my Fiesta isn't listed (it's a 2006 Fiesta Style) So I can't find the re-gas point! Can anyone please help?

Many thanks

Juliec

Share this post


Link to post
Share on other sites
 

I always thought air con was best left to the 'professionals' myself =/

Share this post


Link to post
Share on other sites

I always thought air con was best left to the 'professionals' myself =/

I agree.

A home charging kit is fine for a top up but a proper Aircon Recharge will draw off the duff refrigerant, pressure test the system and lubricate/regas the whole aircon unit and pump.

Usually leaks occur as the seals dry out and shrink so a proper job will recondition the seals and avoid leaking.

Licenced aircon engineers will safely draw off and dispose of old refrigerant, allowing any to escape to open air can incurr a huge fine.

Share this post


Link to post
Share on other sites

The low pressure valve for regassing is located on under the front off side headlamp. You have to remove the headlamp completely to expose the valve so you can regass. A bit fiddly when first trying to remove as you need to take the grille off/out then manipulate the headlamp out carefully without breaking/cracking the bumper! There are 3 torque screws holding the headlamp in. btw - wear thick gloves when regassing as the cannister DOES get quite cold when you regass so be careful. Good luck, let us know if you managed to do it. I got a 7 degree drop in temperature when I did my Fiesta Zetec S :)

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now