MARLEY Posted August 9, 2012 Share Posted August 9, 2012 Does anyone know where i can buy all 8 rear hub bolts for my Focus 2007 2.0L TDCI ? Many Thanks Paul Quote Link to comment Share on other sites More sharing options...
stef123 Posted August 9, 2012 Share Posted August 9, 2012 have you tried your local dealer? or www.fordpartsuk.com im not even sure if these are available seperately tbh, surely they are Quote Link to comment Share on other sites More sharing options...
Lenny Posted August 9, 2012 Share Posted August 9, 2012 Does anyone know where i can buy all 8 rear hub bolts for my Focus 2007 2.0L TDCI ? Many Thanks Paul finis 1506577 comes as a 1 piece unit 5 bolts positioned on it. around £160 from the dealers. you could also email some breakers on eBay. Quote Link to comment Share on other sites More sharing options...
MARLEY Posted August 9, 2012 Author Share Posted August 9, 2012 Sorry meant to say the 8 bolts for securing hubs to rear of car Thanks Again Quote Link to comment Share on other sites More sharing options...
Lenny Posted August 9, 2012 Share Posted August 9, 2012 Sorry meant to say the 8 bolts for securing hubs to rear of car Thanks Again as you can see below mate, their is no part shown for the bolts you require although the image does display the locations for the bolts you require. however your local dealer may be able to locate a part number for them and supply then to you. Quote Link to comment Share on other sites More sharing options...
MARLEY Posted August 9, 2012 Author Share Posted August 9, 2012 as you can see below mate, their is no part shown for the bolts you require although the image does display the locations for the bolts you require. however your local dealer may be able to locate a part number for them and supply then to you. Hi Lenny Would the bolts be part no HS1 ? Quote Link to comment Share on other sites More sharing options...
STEADS Posted August 10, 2012 Share Posted August 10, 2012 I take it you have replaced both hubs/wheel bearings everyone i,ve done new bolts have been supplied with hub Quote Link to comment Share on other sites More sharing options...
MARLEY Posted August 10, 2012 Author Share Posted August 10, 2012 I take it you have replaced both hubs/wheel bearings everyone i,ve done new bolts have been supplied with hub yeh replaced both sides but some are female torx and some male torx and different lengths too. was going to buy 8 new but all the same.Regards Paul Quote Link to comment Share on other sites More sharing options...
Lenny Posted August 10, 2012 Share Posted August 10, 2012 Hi Lenny Would the bolts be part no HS1 ? Hi mate, sorry for the delay in response the bolts HS1 are finis4501619 sold at £0.75 each and are size M10 x 30mm Quote Link to comment Share on other sites More sharing options...
MARLEY Posted August 27, 2012 Author Share Posted August 27, 2012 Hi mate, sorry for the delay in response the bolts HS1 are finis4501619 sold at £0.75 each and are size M10 x 30mm Thanks for info mate,is this the part no that any ford dealer would use ? will go to Evans Halshaw Manchester Tues Thanks again Paul Quote Link to comment Share on other sites More sharing options...
Lenny Posted August 27, 2012 Share Posted August 27, 2012 Thanks for info mate, is this the part no that any ford dealer would use ? will go to Evans Halshaw Manchester Tues Thanks again Paul Yes the finis code was obtained for you using the same ford parts software as the dealers. So they will know what your talking about if you quote the finis number Quote Link to comment Share on other sites More sharing options...
MARLEY Posted September 4, 2012 Author Share Posted September 4, 2012 Hi Lenny I have bought 8 new bolts from my local Ford dealer, the part number is now 1539719 and are £1.14 + vat each. Many Thanks for your help Paul Quote Link to comment Share on other sites More sharing options...
Lenny Posted September 4, 2012 Share Posted September 4, 2012 Hi Lenny I have bought 8 new bolts from my local Ford dealer, the part number is now 1539719 and are £1.14 + vat each. Many Thanks for your help Paul No problem, Ford must have been sick not being able to charge you over £50 lol It seems my advise was usless to you though because the finis number you required is different to the one I quoted to you in previous posts. But bottom line you got it all sorted out anyways. Quote Link to comment Share on other sites More sharing options...
jeebowhite Posted September 6, 2012 Share Posted September 6, 2012 maybe theres an update to the ECAT that you havent got yet. perhaps its part of release 80 that has all the fiddly bits! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Ford UK Shop
Sponsored Ad
Name: eBay
Ford Model: FordUK Shop
Ford Year: 2024
Latest Deals
Ford UK Shop for genuine Ford parts & accessoriesDisclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via the club
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.