Fitted Recaros Need A Bit Of Help Please
Posted 11 August 2012 - 07:33 PM
Posted 11 August 2012 - 08:19 PM
Posted 11 August 2012 - 08:50 PM
not quite sure what you mean its a four door all electric windows i,ve got them all to go down one touch certain they used to come up one touch as well
Posted 11 August 2012 - 08:58 PM
Posted 12 August 2012 - 11:32 AM
Posted 12 August 2012 - 11:55 AM
Whenever you disconnect your battery on your Mk3 Mondeo, your one-touch electric windows will need resetting.
To reset the windows, follow these steps:
- Hold down the down switch until the window is fully lowered
- Release the switch momentarily, and then press down again for 5 seconds
- Hold down the up switch until the window is fully raised
- Release the switch momentarily, and then press up again for 5 seconds
Here you go.
Try this procedure. Should work to change the settings on your module to allow one touch opening and closing again.
Posted 12 August 2012 - 12:52 PM
- Gforce i,ve used one of each used my origional passenger seat one and the drivers seat was on the seat that i fitted so left that are they coded or something so that the ecu recognises a change ?
Posted 13 August 2012 - 12:02 PM
I put ST seats into my old ZS Mondeo and had the same problem as yourself with the seatbelt warning light. Removed the pre-tensionsers that came with the seats and put my own ones in and it cleared the problem.
Reason I mentioned loose plugs too is that the one under my passenger seat is loose. I have a 3 door and everytime I have to move the passenger seat forward to get into the back the warning light will come on afterwards until I push the plugs and wires back in tight.
Posted 13 August 2012 - 12:56 PM
Posted 13 August 2012 - 06:52 PM
Posted 14 August 2012 - 08:36 AM
The other issue on the Mondeo was a seat pressure pad...the pre-facelift Mk3 had a pad on the passenger seat, but this was left off the facelift. So if people were putting the 'wrong' interior in they would have had warning light issues and some got round it by taking the pressure pad out of the old seat, plugging it in and then rolling it up and sticking underneath the base of the seat.
Have you got wiring diagrams for the seats and their plugs by any chance?
Posted 14 August 2012 - 08:42 AM
Posted 14 August 2012 - 09:11 AM
Wonder what year the Recaros came from?
Just came across this through a quick Google...
Might not be of much help but who knows. This poster had trouble as he was putting in RHD seats into LHD car.
Posted 14 August 2012 - 09:57 AM
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users