My 2006, 1.6 Duratorq has developed an overheating problem, but only when stuck in traffic.
I suspect the electric fan is not cutting in, has anyone had a similar problem? Is there a temperature switch associated, or is the fan controlled by the computer?
I have tried to get a workshop manual since I bought the car, but to no avail.
Any advice would be most appreciated.
Thank you in anticipation.
Show
1 reply to this topic
#1
southcoastdweller
-
- Members
-
- 2 posts
Newbie
- Gender: Male
- Ford Model: Fusion 1.6 Duratorq
- Year: 2006
- Location: Sussex
Posted 24 August 2012 - 03:43 PM
#2
tommy.h
-
- Members
-
- 247 posts
Feet Under The Table
- Name: tom
- Gender: Male
- Ford Model: mondeo 2.0 diesel mk4
- Year: 2007
- Location: Cheshire
- Location:hyde
Posted 10 September 2012 - 09:17 PM
Hi
fan is usually controlled by a thermostatic switch mounted on or near the radiator or top hose(normally has two wires connected)
if wires are shorted then fan should run.
check fuses and also relay 12 first though
tom
fan is usually controlled by a thermostatic switch mounted on or near the radiator or top hose(normally has two wires connected)
if wires are shorted then fan should run.
check fuses and also relay 12 first though
tom
Also tagged with one or more of these keywords: overheating, fan problem
United Kingdom - General Ford Discussions by Model →
Ford Fiesta Club →
2007 Fiesta 1.6 Diesel Overheating ProblemStarted by new_horizon, 03 Jan 2013  fiesta, diesel, tdci, 2007, mk6 and 2 more...
|
|
|
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
