Jump to content


Photo

Error Code P2288, Rough Running On Start Up & White Smoke


  • Please log in to reply
3 replies to this topic

#1 SHJONES

SHJONES

    Newbie

  • New Member
  • Pip
  • 2 posts
  • Ford Model: Mondeo ST TDCI 2.2
  • Location: Monmouthshire

Posted 30 August 2012 - 11:49 AM

Hi All,

I'm new here and though i would post a question to see if someone can give me an answer.

My car has been running rough for a while now and getting worse, it only seems to be the case on start up, it sounds very clattery and sometime struggles to turn over, I also get a cloud of white smoke coming out of the exhaust.

So i got a cable for my laptop with formidable (i think thats what its called), and checked for error codeds on start up, I got P2288 something about the fuel pressure is to high.

Any suggestions on what I can do to fix it or what might cause this issue?

I would like to try re - codeing my existing injectors, can anyone please give me a step by step guide on how to do this with Formidable?
Do i just make a note of the codes against each injector and re-enterthem in the same sequence following the instructions in the software ?

I know its advisable to get new ones, but I cant afford them for a few months :-(.

Have something to contribute?

Sign in or register to start a topic...



Sign up to FOC Premium Membership To Remove These Ads

#2 ppeter7

ppeter7

    Feet Under The Table

  • Budding Enthusiast
  • PipPipPipPip
  • 328 posts
  • Name: peter
  • Ford Model: mondeo 1.8/ mondeo 2.0 zetec
  • Year: 2001
  • Location: Devon

Posted 30 August 2012 - 08:49 PM

have you checked hoses 4 splits?

#3 Stoney871

Stoney871

    Resident Peacekeeper

  • Super Mod
  • 18,110 posts
  • Name: Clive
  • Ford Model: 2015 Focus ST3 250BHP
  • Year: 2015
  • Location: Devon
Contributor

Posted 30 August 2012 - 09:40 PM

p2288 - injector control pressure too high

#4 SHJONES

SHJONES

    Newbie

  • New Member
  • Pip
  • 2 posts
  • Ford Model: Mondeo ST TDCI 2.2
  • Location: Monmouthshire

Posted 31 August 2012 - 07:15 AM

Any thoughts on what the solution might be? I'm going to take it to the garage I think, but i would assume they will say an injector needs replacing £200 please.


Not what you're looking for?

Register now, we have a huge community of enthusiasts to answer any questions you might have



0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users