Jump to content
Do Not Sell My Personal Information


Fault Code Help Please


trev16185
 Share

Recommended Posts

Hi I have 2 fault codes which keep re appearing and it's drivin me mad..

Codes are p0405 and p0401

P0405 says exhaust gas recirculation sensor A circuit low

And P0401 says exhaust gas recirculation flow insufficient detected

I've have these cleared a few times only to keep reappearing have also tried cleaning my egr which didn't work and also tried a new egr valve which also didn't work..

Any help guys would be great I don't now much about the fords but its driving me mad.. By the way cars a 05 mondeo 2.0 tdci 130 bhp euro 4

Link to comment
Share on other sites


have you tried the inlet manifold clearing that out mate

Link to comment
Share on other sites

i havent but after a bit of research this morning i was thinking of doing that as in my head thought maybe valve is operating correctly but if manifold is clogged up the flow of air may not be suffient in turn puttin on the engine light..might try taking it off later today...have you ever done this before?

Link to comment
Share on other sites

i havent but others have and seems easy job to do mate

Link to comment
Share on other sites

I'll try that when I get a chance Sony do it any harm.. Maybe also worth mentioning I have a code p1000 as well.. Would it be possible that this p1000 code is stopping the light form turning off as egr maybe hasn't done a full drive cycle as ford talk about...

Link to comment
Share on other sites


Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share




×
×
  • Create New...

Forums


News


Membership