Jump to content


Photo

Spring Replacement

Spring replacement

  • Please log in to reply
2 replies to this topic

#1 Chudson

Chudson

    Newbie

  • New Member
  • Pip
  • 5 posts
  • Ford Model: Mondeo 2.0 TDDI Estate
  • Location: Waterford

Posted 22 October 2012 - 05:17 PM

Hi Guys I have a 2001 mk 3 mondeo estate 2.0tddi zetec manual, I recently replaced steel wheels with 18inch ronal st alloys and while doing so I noticed the front passenger side spring was sheered in two. It is barely supported and the top half is currently resting on the bottom half, I was wondering is it a difficult job to replace them, I have a full socket set , spanors ,.jack and spring compressors, Would a scrap yard saloon mk 3 mondeo part fit? and where do the bump stops go when putting back on. Between the coils or between the top of the shock and the housing? and info would be greatly appreciated as I am a new member

Have something to contribute?

Sign in or register to start a topic...

Sign up to FOC Premium Membership To Remove These Ads

#2 turbo-rich

turbo-rich

    Member

  • New Member
  • PipPip
  • 11 posts
  • Ford Model: 1.8tdci
  • Location: Cumbria

Posted 23 October 2012 - 12:32 PM

Take around 2hrs for garage to do so looking at 2hrs for them.. thats with tools lift and shock compressor...
Ebay the part then allow half a day max if ur unsure

#3 Chudson

Chudson

    Newbie

  • New Member
  • Pip
  • 5 posts
  • Ford Model: Mondeo 2.0 TDDI Estate
  • Location: Waterford

Posted 24 October 2012 - 04:41 AM

cheers man, good to know :)


Not what you're looking for?

Register now, we have a huge community of enthusiasts to answer any questions you might have




Also tagged with one or more of these keywords: Spring replacement

0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users