Chudson Posted October 22, 2012 Share Posted October 22, 2012 Hi Guys I have a 2001 mk 3 mondeo estate 2.0tddi zetec manual, I recently replaced steel wheels with 18inch ronal st alloys and while doing so I noticed the front passenger side spring was sheered in two. It is barely supported and the top half is currently resting on the bottom half, I was wondering is it a difficult job to replace them, I have a full socket set , spanors ,.jack and spring compressors, Would a scrap yard saloon mk 3 mondeo part fit? and where do the bump stops go when putting back on. Between the coils or between the top of the shock and the housing? and info would be greatly appreciated as I am a new member Quote Link to comment Share on other sites More sharing options...
turbo-rich Posted October 23, 2012 Share Posted October 23, 2012 Take around 2hrs for garage to do so looking at 2hrs for them.. thats with tools lift and shock compressor... eBay the part then allow half a day max if ur unsure Quote Link to comment Share on other sites More sharing options...
Chudson Posted October 24, 2012 Author Share Posted October 24, 2012 cheers man, good to know :) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.