3 replies to this topic

[mickyd]

Does anyone know how to cure this auto window problem, when i unlock the the car with the remote and hold the button to drop all the windows everything works fine but when i lock it and hold the button to close only the nearside window goes up, so i then have to unlock the car and do the others manually. Was working fine the other day.

[SierraYankee99]

Global closing needs reprogramming on each door.



If you are unable to close the windows by remote, you probably need to set the fully closed position:

1. Open the window
2. Fully close it using driver's window control
3. Press and hold up button for 5 seconds

The fully closed position has now been set. Repeat the above steps for all windows.

NB. This needs to be done every time you disconnect the car's battery.

[mickyd]

Still not working, but i did disconnect the battery the other day to replace my bluetooth.. do i need to auto open or manually open and then individually close each one from the drivers panel or from its own button...Cheers

[SierraYankee99]

Manually open the window fully, then close it. Then hold the button on the door of the car on the up part for 5 seconds. Then repeat for each door. I believe you use the controls on the drivers door to do each window not the one on the individual door.