Will I Keep My Mileage If I Replace Dashboard?
Posted 17 November 2012 - 11:17 PM
and it doesnt clock any miles on the mileage trip count (the cars mileage is ok and adds up)
Can i just buy another instrument cluster from same year car, will it show my current correct mileage or will it show the mileage from the car the old instrument cluster is from (ie car from scrapyard)
Dont know if my cars mileage is stored on the instrument cluster its self or somewhere else on the car ?
Posted 17 November 2012 - 11:28 PM
Option 2... Keep the mileage on the replacement as it us, but you must make a note of when they were changed and what the mileage was originally. It would technically be an offence to sell the car on without this information, especially if the mileage was showing less than the car has done. And these things are all present on MOT's these days.
Posted 18 November 2012 - 12:16 AM
If you sold the car and didn't notify the new owner of the change to the mileage then it would be mis-representation and you could be prosecuted.
Keep any receipts for purchasing a replacement cluster and it may also be a good idea to notify DVLA just to be safe.
Posted 18 November 2012 - 12:20 AM
You can only increase though, so say you bought a cluster from a car that had done less miles than you, you could use ELM to increase the miles to what you have actually done.
You can't get a cluster from a car that's done more miles though and decrease it to what you've actually done.
But like I said I don't think ELM works with the mk1
Like Mike said you can pay to have it corrected or note it down, if you sold the car on without saying then it's fraud cause you'd be claiming to have done less miles than you really have.
Posted 18 November 2012 - 12:29 AM
As I said before, keep receipts and all details of mileage and inform DVLA then you're covered.
Posted 18 November 2012 - 11:26 AM
I believe my Focus is a MK2 isnt it ?
Posted 18 November 2012 - 01:18 PM
If you look on the focus guides section, Preee has written a guide on it and you will find many pages of infornation. It has now also be translated into english and very easy to use.
You connect your car to a laptop using an ELM327 interface cable and use the software to turn on feautures that ford left turn off and would charge around 75quid per option turned on.
You can turn on features such as auto door locking at a certain speed and instant fuel readout so you can see what MPG your getting while driving etc.
More importantly in your case there is an option to increase the mileage on the clocks.
What year is your focus? When I looked at your photo it appeared to be a mk1.
The mk system isn't an official ford system as they just go by build year.
If your car isn't late 05-07 it's not a mk2.
I'm not completely sure on mk1 years but i think it's something like
99- early 03 is mk1
late 03 -early 05 is mk1.5 (or 'facelift')
late 05 - early 07 is mk2
late 07 - early 10 is mk2.5 (facelift)
late 10 - present is mk3
But breakers etc get the system completely wrong and go mk1 mk2 mk3 mk4 mk5 which can be very confusing for people who don't know about fords who are trying to buy parts.
Posted 18 November 2012 - 03:12 PM
Your cluster is probably suffering from dry joint soldering , some people take these apart and re-solder the inside's , the problem is caused by the crap solder that Ford used on the clusters.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users