7 replies to this topic

[sambooka]

I recently bought some white mist type washer jets. Now the fitting part was easy and I'm happy with the results
Before(bonnet on catch)

After

And for those who say they spray to low mine spray halfway down the roof aswell as the whole windscreen which is sort of the problem I know you can't adjust them but is there anyway I can clean them out I'm thinking compressed air but don't want to damage the internals

[b1g_dav3]

There are no internals, all it is is a lump of plastic

[sambooka]

When I put a small screwdriver in it it felt like there was a rubber gasket on flaps in the front of it

[b1g_dav3]

Hm, mine have no gasket as far as I've found, just a little heater thing.

[sambooka]

Yeh mine have the heater thing it just seemed like there was a springy rubber gasket. I only want to clear them out because one of them doesn't spray evenly

[Stoney871]

Get a can of computer cleaning spray air (as high a pressure one you can find) and give it a good blast through.

[sambooka]

Compressed air at work is 10 bar think that should sort it or is that a bit much

[Stoney871]

A very quick shot should be ok.