Jump to content
Do Not Sell My Personal Information


Guide To Installing A Reverse Parking Camera


Brigante
 Share

Recommended Posts

hiya brig

figured out the problem now, its all down to power, what i had orignally done was wired the supply for the receiver in parallel to the cd player supply, this meant that when ever the cd player was on the receiver was giving the HU a input signal, hence why only a image would show up and you couldn't do anything else, once we realised this we knew we had to find a supply from a source that would be switched live, we couldn't find any, so we decided to try the reverse light, we found the wires behind the boot carpet on the side and spliced into there and boom everything working

so soldered everything back in and now works perfectly,

lesson learnt ... don't try cut corners, do the job properly in the first place haha :D

Link to comment
Share on other sites


hiya brig

figured out the problem now, its all down to power, what i had orignally done was wired the supply for the receiver in parallel to the cd player supply, this meant that when ever the cd player was on the receiver was giving the HU a input signal, hence why only a image would show up and you couldn't do anything else, once we realised this we knew we had to find a supply from a source that would be switched live, we couldn't find any, so we decided to try the reverse light, we found the wires behind the boot carpet on the side and spliced into there and boom everything working

so soldered everything back in and now works perfectly,

lesson learnt ... don't try cut corners, do the job properly in the first place haha :D

Lol yup would help wiring the reverse camera into the reverse light :D

Glad you got it sorted n working now mate

Link to comment
Share on other sites

  • 1 month later...

Great guide brigante ,

Just received my rear cam and hope to follow your guide this weekend . Bought a 3.5 inch lcd screen to view it on . Have pulled that to pieces already and fitted it into a mondeo sunglasses holder . doesn't look to bad so far :)

20130515_174346.jpg

8bb8da5e-6600-43bd-a878-3435e1858f11.jpg

a0c816e5-bfbe-45b7-ba09-0fa3c3c46dc5.jpg

Link to comment
Share on other sites

Very nicely done custom installation, ingenious and practical indeed.

Well done there Sir.

Link to comment
Share on other sites

Great guide brigante ,

Just received my rear cam and hope to follow your guide this weekend . Bought a 3.5 inch lcd screen to view it on . Have pulled that to pieces already and fitted it into a mondeo sunglasses holder . doesn't look to bad so far :)

8bb8da5e-6600-43bd-a878-3435e1858f11.jpg

Very nicely done custom installation, ingenious and practical indeed.

Well done there Sir.

agreed with clive, certainly a nice custom job you've come up with there

you should have less wiring too as it isnt going into a head unit

Link to comment
Share on other sites


Very nicely done custom installation, ingenious and practical indeed.

Well done there Sir.

Thanks very much mate , pretty chuffed with it so far and sunglasses still fit.. bonus! . LCD has 2 inputs so am going to mount a front cam in the lower grille if all goes well .

i'm a noob at this here and don't want to hijack brigante's great thread on the cam install so will hopefully have a go at doing a guide when its all sorted .

  • Like 1
Link to comment
Share on other sites

agreed with clive, certainly a nice custom job you've come up with there

you should have less wiring too as it isnt going into a head unit

Thanks again for the guide brig and the nice comment. it was a bit wafty cutting the roof lining!

yep , hoping that once I get the cam cable through the boot door that I can somehow drag it across the roof lining to the screen . Not sure how i'm going to route the cable front the front one yet though as I don't know where the bulkhead grommets are

Link to comment
Share on other sites

I believe the grommet is under the passenger side footwell behind the internal Fusebox.

Link to comment
Share on other sites

why do you need do anything with the bulk head?

the wiring route should be a lot easier for you as your screens in the roof lining so the wire has no need to go into the footwell like with my route

instead you just need to follow my guide for actually mounting the camera to the tail gate n getting it into the car, then follow my wire route along the edge of the rooflining behind the door seals, b pillar etc

but when you get to the top of the passenger door way, you should be able to pull out your courtesy light and thread the wire from the door way across the roof lining and out through the hole in the middle then connect it to the screen

Link to comment
Share on other sites

Cheers brig , will follow those routing instructions .

Stoney's right , I'm also going to mount a camera in the front grill and there's a grommet I need to go through behind the glovebox area

Link to comment
Share on other sites

Ah ok yup you'll need to do that then lol

Didnt realize you wanted to mount a front camera too

Its summin i've been meaning to do too

Just need to get round to getting the extra camera and sussing out a way of wiring it in cause i've only got one camera input on back of me headunit

Link to comment
Share on other sites

Got the rear cam fitted and wired up , works really well .

Made a bit of a boob with the front cam lol! , fortunately I tested it before fitting and realised I bought a rear cam for the front so everything was back to front and no option on the lcd to reverse the image. So if your fitting a front cam look out for ones that say non-mirror. Oh we'll , egr valve plate and drl fog surrounds came today so got something else to play with this weekend :)

Link to comment
Share on other sites

got any photos of it all up working dude?

Link to comment
Share on other sites


got any photos of it all up working dude?

'ere you go mate , Almost done apart from I need to change the power wire to the lcd . its currently tapped in to a thin yellow/green wire on the back of the head unit . waiting for a piggyback fuse to come so I can wire it properly to the acc .

20130519_110745.jpg

20130519_110820.jpg

20130519_110658copy.jpg

Link to comment
Share on other sites

  • 1 month later...

'ere you go mate , Almost done apart from I need to change the power wire to the lcd . its currently tapped in to a thin yellow/green wire on the back of the head unit . waiting for a piggyback fuse to come so I can wire it properly to the acc .

20130519_110745.jpg

dunno if your still about here mate but i've just bought the same mondeo unit as you

how did you go about fitting it? like did it fit in easy enough cause i'm looking at it n thinking it'll be too long

did you cut the hole bigger straight back from the existing hole if you get what i mean? or did you have to cut the existing hole further forward to mount the unit further forward?

Link to comment
Share on other sites

dunno if your still about here mate but i've just bought the same mondeo unit as you

how did you go about fitting it? like did it fit in easy enough cause i'm looking at it n thinking it'll be too long

did you cut the hole bigger straight back from the existing hole if you get what i mean? or did you have to cut the existing hole further forward to mount the unit further forward?

Still ere mate!

It's not too bad to fit but you gotta be careful..

You do need to do a bit of cutting . First I took the black 'back box' and light unit out of the sunglasses holder so you just have the grey plastic surround , next I took the old unit out of the headlining . Then I slid the front of the mondeo unit in place (think I had to open the front clips a bit) it needs to go as far forward as possible but be careful as i pushed a bit too hard and slightly creased my headlining.

Once I'd got that far then I just measured how far back I needed to cut and marked it on the headlining.

Be really careful when cutting as I had a loom taped right where the cuts go so have a feel about in there before you do.

The sunglasses end is a real tight fit as the headlining is too thick so it also needed a bit of the foam backing trimming down . If you don't trim enough off you can't clip the backbox back on the interior unit .

Hope that kinda makes sense and good luck . I think there was a great fiesta guide on here somewhere but I can't find it now

Link to comment
Share on other sites

  • 1 month later...

UPDATE-

I removed the stock light and cut a whole just big enough for the camera I ordered, I then melted the plastic around it so it became one piece (also had to trim the camera)

http://www.ebay.co.uk/itm/330659894130?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649

I believe that is the one I ordered.

Anyway now my camera is all fitted :) for some reaso it wouldnt work on my head unit so i ordered a separate screen.

I have since got replies from sellers and I have been told the nearest fit to my car is this camera-

http://www.ebay.co.uk/itm/260900427232?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649

So for anyone with the same car as mine it might be easier to order this one and see how well it fits!

Thanks guys

Link to comment
Share on other sites

  • 5 months later...

Some good advice here but has anyone fitted a similar camera to a Fiesta Mk 7 (2013). I can't see a straightforward way of routing the wire from the hatch down to the reversing light. I can see I will have to remove the hatch trim to get to the wiring but getting behind the hatch metalwork to reach the rubber conduit looks too difficult. My camera setup uses a wireless system so I don't need to reach the front of the car with wires. Any advice appreciated.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share





×
×
  • Create New...

Forums


News


Membership