FordFocusman Posted January 11, 2013 Share Posted January 11, 2013 Hi, After hours of researches and i didn't find one exhaust which could fit my car, I would love to fit this kind of exhaust on my focus : http://www.ebay.co.uk/itm/Sport-Exhaust-Chrome-Tail-Pipe-Tip-Trim-Ford-Focus-Mk2-Hatchback-2005-2012-/300629037212?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item45fee3109c&clk_rvr_id=430815824099&afsrc=1 But this one will not fit coz the inlet diameter is 50 mm and mine is about 58 mm. Do you have any links of this kind of exhaust which could fit my car please Thank you Quote Link to comment Share on other sites More sharing options...
TDCiST Posted January 11, 2013 Share Posted January 11, 2013 I was ld to believe that the 2.0L Petrol Miltek Exhaust would fit.... However most people opt for a Longlife or similar custom exhaust... Quote Link to comment Share on other sites More sharing options...
FordFocusman Posted January 12, 2013 Author Share Posted January 12, 2013 thanks for your answer mate. No unfortunaltely the 2.0L petrol wouldn't fit coz the one i wanted was for petrol 1.6 ; 1.8 ; 2.0 and the inlet diameter is 50 mm. Any link please ? Quote Link to comment Share on other sites More sharing options...
Lenny Posted January 12, 2013 Share Posted January 12, 2013 I purchased a 2.5" dpf back stainless performance exhaust from piper and im 1000% happy with it, Perfect equal levels of smoke from both tips, purchased through Ruderacing.com http://www.ebay.co.uk/itm/Piper-Stainless-Exhaust-Cat-Back-Duplex-System-Focus-2-0-04-10-Diesel-DFOC7AS-J-/260970118574?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item3cc307fdae Quote Link to comment Share on other sites More sharing options...
FordFocusman Posted January 12, 2013 Author Share Posted January 12, 2013 Cheers for that very clean and great work no doubt about that But i'm looking for a pipe like in the link i showed you, it's like the audis s3 you know Quote Link to comment Share on other sites More sharing options...
Lenny Posted January 12, 2013 Share Posted January 12, 2013 Cheers for that very clean and great work no doubt about that But i'm looking for a pipe like in the link i showed you, it's like the audis s3 you know Ow rite sorry lol Your looking for a twin exit on the silencer side only. Perhaps contact the seller and ask if the spec is internal or external diameter. And these type usually sleeve on to the pipe pertruding slightly from the rear silencer. It doesnt fit the existing pipe from silencer to tip. It replaces that whole section. So you may still be good with that one mate. Quote Link to comment Share on other sites More sharing options...
FordFocusman Posted January 12, 2013 Author Share Posted January 12, 2013 I did and the inlet diameter is 50 mm and mine is about 58 mm, the petrol pipes are a bit smaller than diesel ones that's why it will not fit but i'm going to get a quote from Longlife for a twin exit Quote Link to comment Share on other sites More sharing options...
Lenny Posted January 12, 2013 Share Posted January 12, 2013 I did and the inlet diameter is 50 mm and mine is about 58 mm, the petrol pipes are a bit smaller than diesel ones that's why it will not fit but i'm going to get a quote from Longlife for a twin exit shouldnt be more than 50pounds fitted. Just hard to keep em clean on diesel, but if you apply some chrome polish as soon as when fitted, It will help protect it from suit and carbon. Quote Link to comment Share on other sites More sharing options...
FordFocusman Posted January 12, 2013 Author Share Posted January 12, 2013 yes absolutely agree i will put some chrome polish on it period ! Quote Link to comment Share on other sites More sharing options...
Haz93 Posted January 12, 2013 Share Posted January 12, 2013 You can get a twin exit exhaust like the one in your link from bastuck. The best place to look is on europeancarparts as they sell the bastuck exhaust systems that are specific to your engine size. Also there is a guy on focusowners.com who is also on here but not active much who swapped his 1.8 petrol exhaust for a 1.8 deisel exhaust and they look the exact same size and he fitted a tip like your link with no probs. best to see if you can get in touch with him, think his name is Franno on focusowners Quote Link to comment Share on other sites More sharing options...
FordFocusman Posted January 12, 2013 Author Share Posted January 12, 2013 thanks for the information mate. I found a franno but last time he was online was in 2011, maybe it is not him. if you have a link it would be awesome mate thanks Quote Link to comment Share on other sites More sharing options...
martyntdci Posted January 12, 2013 Share Posted January 12, 2013 give these a buzz... they will sort you out... TOP GEAR RACING Gatehouse Way AYLESBURY, Bucks. HP19 8DB TEL: 01296 433011 Quote Link to comment Share on other sites More sharing options...
martyntdci Posted January 12, 2013 Share Posted January 12, 2013 custon made on site exhaust company to your spec... i use the stafford branch Quote Link to comment Share on other sites More sharing options...
FordFocusman Posted January 13, 2013 Author Share Posted January 13, 2013 all right i will check it out thank you very much Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.