Jump to content


Show
Photo

Washer Bottle Pump


  • Please log in to reply
1 reply to this topic

#1 yozza64

yozza64

    Settling In Well

  • Budding Enthusiast
  • PipPipPip
  • 39 posts
  • Name: Alan
  • Ford Model: Mondeo 1.8 LX
  • Year: 2004
  • Location: Cheshire

Posted 17 January 2013 - 05:02 PM

Hi guys ive sold my old preface Mk3 Mondeo and just bought a 2004 54 Reg Facelift Mondeo, which im well pleased with. Ive got a small problem with it, as in water is leaking out around the washer bottle pump.. Ive had a look from underneath the car and pulled the pump out and checked the pipes attached to it, and they are still attached and seem ok. Also checked the rubbber seal in the bottle and that seems ok as well. I cleaned it all up and put it back together and refilled the washer bottle but it still leaks. The only place I can see water around the pump is the area where the 2 elbows come out of the pump and is dripping down from there onto the floor.

My thinking is due to the very cold weather we are having is that at some point the washer bottle has frozen and in trying to use the washers has split/cracked one of the elbows on the pump.

I have ordered a new replacement washer pump off ebay, in the hope that this cures the leak.

What are your thoughts on this or could I be right in what I have put

Have something to contribute?

Sign in or register to start a topic...

Sign up to FOC Premium Membership To Remove These Ads

#2 ppeter7

ppeter7

    Feet Under The Table

  • Budding Enthusiast
  • PipPipPipPip
  • 324 posts
  • Name: peter
  • Ford Model: mondeo 1.8/ mondeo 2.0 zetec
  • Year: 2001
  • Location: Devon

Posted 17 January 2013 - 05:55 PM

have you checked the pipes that conect to it are not split or got holes in


Not what you're looking for?

Register now, we have a huge community of enthusiasts to answer any questions you might have



0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users