Won't Go in to gear properly
Posted 08 March 2009 - 01:14 PM
mid december the same problem although it wouldnyt go into gear at all, engine on or off. took it to same garage. said something about transmission fluid and the slave cylinder. paid for this work to be done.
now again, the car is not going into gear properly and reverse is grinding. they had said to me last time teh cylinders can go at any time and next time it could be your master cylinder (which is perhaps what has happened now).
is this the case or could there be a problem elsewhere that hasnt been looked at or is something dodgy going on?
any help would be appreciated.
Have something to contribute?
Sign in or register to start a topic...
Posted 08 March 2009 - 01:38 PM
Posted 08 March 2009 - 11:03 PM
thanks for your reply.
If your clutch master cylinder has gone theres usually clutch fluid inside the car on the pedal. To be honest it sounds to me like the cables need adjusting on the selector.
theres no fluid inside the car..
could it have been this in the first place - the selector?
this sounds like a quick job and not something that would have cost me £500.
i know its hard to say without looking at car.
Posted 09 March 2009 - 07:18 AM
Not what you're looking for?
Register now, we have a huge community of enthusiasts to answer any questions you might have
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users