Jump to content
Do Not Sell My Personal Information


Installing A Subwoofer To A Fiesta Mk7


Jordy Pulleyne
 Share

Recommended Posts

I have a subwoofer and and amp with a wiring kit. Can I install it to my fiesta as it is or do I need to make modifications?

Link to comment
Share on other sites


Not really.

You will need to feed your "live" wire (red one) either through the bulkhead (should be a plastic cap over a small hole on the passenger side footwell of the car) or feed it under the wing and into the car.

You will have to take the door sill off and feed the wires under the carpet.

Make sure your phono cables are ran along the opposite side of the car away from the Live cable to save on interference.

Best place for the "Earth" cable would be the bolts on the lower boot latch.

IMO I would mount the amp and sub on a piece of fitted wood and drill in place to save it knocking around.

Hope this helps

Link to comment
Share on other sites

Yeah I mean connecting the audio and remote cables to the head unit, is that as simple as fitting to an aftermarket one?

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share




×
×
  • Create New...

Forums


News


Membership