Jump to content


Photo

Dmb Gel Overlays


  • Please log in to reply
9 replies to this topic

#1 Wildfire78

Wildfire78

    Member

  • New Member
  • PipPip
  • 15 posts
  • Ford Model: Escort mk6 cabriolet
  • Location: Cornwall

Posted 30 January 2013 - 04:59 PM

The review i left :/

Bought a set of these, not really happy....the back one was way to small, the front one was a little to big (overlays were the same size) and all the curves on the writting are very pixilated its almost as if the production process is unable to make/print a curve.

Very disappointed, didn't bother to contact DMB as i have bodged them because you cannot return if you have removed from backing which i did.

Just thought i would let you guys know as i am really disappointed and don't want anyone else to get "scammed" like i did :(

Have something to contribute?

Sign in or register to start a topic...

Sign up to FOC Premium Membership To Remove These Ads

#2 iNath

iNath

    ST-2 Mod

  • Super Mod
  • 3,631 posts
  • Name: Nathan
  • Ford Model: Molten Orange Fiesta ST-2
  • Year: 2013
  • Location: Buckinghamshire
Contributor

Posted 30 January 2013 - 05:27 PM

On this forum and many other (especially Fiesta) forums you will find many many happy & satisfied customers.

It's unfortunate that you didn't check they fit before peeling them off the backing, but I disagree you've been scammed, especially as you haven't even contacted them to see if there's anything they can offer you!

#3 Foci_st3

Foci_st3

    Feet Under The Table

  • Budding Enthusiast
  • PipPipPipPip
  • 332 posts
  • Name: D
  • Ford Model: MK3 Focus Titanium x
  • Year: 2012
  • Location: Buckinghamshire

Posted 30 January 2013 - 05:39 PM

I agree with inath, DMB have always been very good I had front and rear gel badges and side stripes and a key fob badge from them on my previous focus st, I've now got some badge overlays for my 2012 focus which are yet to be fitted. Maybe you got a bad batch as it can happen as I found this when I got my key fob badge which was to small for my flip key so I contacted them with the dimensions because I think they had 2 size types of the keys and they sent a replacement free of charge and I managed to fit the extra one to my spare key.

#4 Wildfire78

Wildfire78

    Member

  • New Member
  • PipPip
  • 15 posts
  • Ford Model: Escort mk6 cabriolet
  • Location: Cornwall

Posted 30 January 2013 - 05:43 PM

Hummmm maybe i was a bit hasty to complain but it never crossed my mind that they wouldn't fit and also was a little awkward to see if they are a good fit as they are just on one big backing sheet

#5 Brigante

Brigante

    Resident Ranter

  • FOC Supporters
  • 2,476 posts
  • Name: Charlie
  • Ford Model: Mondeo Titan X Sport 2.2 175BHP
  • Year: 2008
  • Location: Nottinghamshire
Contributor

Posted 30 January 2013 - 06:26 PM

mine fit perfectly

#6 DanGersFord

DanGersFord

    Dan The Gas Man

  • FOC Supporters
  • 3,498 posts
  • Name: Daniel
  • Ford Model: Fiesta ST3
  • Year: 2014
  • Location: Scotland
Contributor

Posted 30 January 2013 - 06:35 PM

Please note that the gel badges dont cover the full badge, they only cover the coloured bit of the badge not the chrome outline normally.(just incase this is what you mean about them not fitting)

#7 Gary Minty Jupe

Gary Minty Jupe

    Feet Under The Table

  • Members via FB
  • PipPipPipPip
  • 193 posts
  • Ford Model: 1.6 zetec
  • Year: 2008
  • Location: Essex

Posted 30 January 2013 - 06:37 PM

mine are great !

#8 Stoney871

Stoney871

    Resident Peacekeeper

  • Super Mod
  • 15,832 posts
  • Name: Clive
  • Ford Model: Focus mk2 1.8 TDCI Sport
  • Year: 2007
  • Location: Devon
Contributor

Posted 30 January 2013 - 07:00 PM

Mine are good quality, shame i've had them a year and haven't got around to fitting them yet. Posted Image

#9 Wildfire78

Wildfire78

    Member

  • New Member
  • PipPip
  • 15 posts
  • Ford Model: Escort mk6 cabriolet
  • Location: Cornwall

Posted 30 January 2013 - 08:02 PM

Please note that the gel badges dont cover the full badge, they only cover the coloured bit of the badge not the chrome outline normally.(just incase this is what you mean about them not fitting)


Yea i know but its far to small there is probably a 5mm gap round the edge

#10 jimrex

jimrex

    Too much time on the boards

  • FOC Supporters
  • 574 posts
  • Name: James
  • Ford Model: 2011 Mk3 Focus, 2009 Mk7 Fiesta
  • Year: 2011
  • Location: Cambridgeshire

Posted 31 January 2013 - 01:53 PM

I found DMB very pleasant to deal with, and the overlays on my Focus are brilliant.

My front one came off (probably more to do with me fitting it than the overlay failing) but it has been replaced and I'm very happy with them.

As said above, contacting DMB first would have given them the opportunity to solve your issues.

Have something to contribute?

Sign in or register to start a topic...


Not what you're looking for?

Register now, we have a huge community of enthusiasts to answer any questions you might have



0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users