Jump to content
Do Not Sell My Personal Information


Mondeo Titanium X Sport Build Thread!


dohboy78
 Share

Recommended Posts

Standard is 175BHP, now maybe 190BHP... after remap... maybe 240BHP??

Link to comment
Share on other sites


Very nice. Hope torque steer doesn't take away from the fun ;)

Link to comment
Share on other sites

The decat was made by a guy I found through a fellow member.

PM me and I will forward his email address.

Are you getting the 2.2?

Yes mate it will be the 2.2 one I should have it in 3 weeks sill taking my st apart I will keep a eye out for the Collins map see what it dose as I love the cp330 map I had on my st

Link to comment
Share on other sites

  • 3 weeks later...

Last night had the rear diffuser wrapped in Gloss Black... Thanks to Mark again!

E78787F6-FBE7-42C9-B551-FEE1DBF697A0_zps

Today was a good day...

Up
at 5.30am to travel down to Collins Performance in Congleton. Hit some
major traffic on the way down and arrived just after 10 am.

On
arrival I was greeted by Gary and work soon commenced. Gary whipped out
the ECU from under the wheel-arch and presented it to Martin to work
his magic.

DC1944C0-C451-4246-A3C5-3D070E0C7496_zps

16EBD815-DA28-4963-881B-A0FB17489BA4_zps

5A6F321F-8E38-4C06-9411-05D9A805BDFB_zps

After
it was confirmed that Martin could crack the ECU and reprogram it Gary
then dismantled the DPF from the car and fitted my custom AAS DPF delete
pipe. Now the car has a full stainless exhaust with de-cat and DPF
delete.

BA2695CE-023D-4869-B7FE-179C012FB708_zps

A9B31ED2-0854-4365-8C7B-542DEA0DC098_zps

A
few hours of reading Fast Ford and Performance Ford in the lobby and
chatting with Gary about brake upgrades. It might be possible to fit
some Focus RS MK2 brakes, then upgrade the discs and pads... but need
confirmation from somewhere... or find a RS calliper to try. Otherwise
the S-Max Callipers and discs will fit but not much of an upgrade, or
buy some K-Sport 8 pots for around a grand.

After a
while Martin came down from the Bat-Cave with my bespoke custom
programmed ECU with DPF delete file and EGR delete too! Gary popped it
back in and Martin took me for a spin to check the map works as its
supposed to.

My god... I was sure this was not my car.
Initial start up and it roars!! The pull is now immense and smooth in
all gears. Turbo kicks in at low revs and just keeps pulling. The
exhaust sounds even better under load! I was REALLY impressed.

Got
back to HQ and Gary popped the ECU out again so Martin could seal it.
Once done it was slotted back in and everything bolted back together
again.

8273AE85-0AB6-4EC1-9D8F-A313A580F069_zps

I payed up and headed back to the NE... got a couple of CP stickers to fit at a later date.

Pulling
out onto the road and I nearly left an 11 behind me! Wow... torque
massive!! Loads of traffic going near Manchester to hit the ring road...
then the fun began! Out on the motorway I gave the Mondy some beans...
broom broom!! It feels like a new car. Quick, torquey and very
responsive. Loving the growl. Had a "Grass Hole" in an Audi riding in my
boot... so dropped a cog and left him standing. Mint.

So
big thanks to Gary and Martin again for sorting the mapping and DPF
delete. I dare say I will be back when I get my next Ford!

Link to comment
Share on other sites

Just read through this, that is a fantastic job there! Do you know what BHP it is now?

Link to comment
Share on other sites


Car looks awesome.

Yunii

Sent from my HTC Sensation XE with Beats Audio Z715e using Ford OC mobile app

  • Like 1
Link to comment
Share on other sites

  • 3 weeks later...

As it always happens with my cars... I now have the Mondeo pretty
much where I want it performance wise... and I think I may sell it.

I am moving back to Lincolnshire in early Jan... and will be buying our first house.

To generate more capital for a deposit I think selling my car will free up some cash. Would be looking for around £13k for it.

Would replace with a Mondeo MK3 ST-TDCI.

  • Like 1
Link to comment
Share on other sites

Recon around 240 ish...

Could you put up the graphs - the most so far with the mk4 2.2L on these types of mods has been about 220Hp

  • Like 1
Link to comment
Share on other sites

No graphs... Not been on a rolling road yet.

I'm going off a standard car with remap by Collins going from 175 BHP to approx 220 BHP. So recon with the added decat, DPF delete, exhaust, uprated intercooler and RS K&N air cone should be an extra 20 BHP or so. Hopefully get it on a rolling road in 2014 if I don't sell it first!

Link to comment
Share on other sites

I will first have available money around 13 june, i guess that's a bit to late :P

Link to comment
Share on other sites

Do boy, thanks for your brilliant blog, I bought a black txs 2.2 mk4 2009 on a09 plate, had a BMW e90 330d befor, was a brill car, but the mondeo is a far better all round car, had nothing but bills with the BMW , I love the mondeo, I had a st 24 on a r plate ten years ago, I loved it but this car is miles better ! Love everything you have done to your car, would love to do a remap, but have seen those plug inn boxes on eBay, do you know anything about them, ?

Link to comment
Share on other sites


Yeah... I have heard they can be bad new dude! I know some people run them without issue... But I would not touch one! If your serious about your motor get a remap. If your near Collins Performance in Macclesfield ... Pop in and talk to them. I drove down from Newcastle... Once in my Focus ST and once in the Mondeo. They are masters of remapping! Car feels brilliant.

Link to comment
Share on other sites

I will first have available money around 13 june, i guess that's a bit to late :P 

Might not be...

  • Like 1
Link to comment
Share on other sites

  • 2 weeks later...

any videos on what this beast sounds like?

Not yet dude... will endevour to get one at some point. Sounds luverly!

Link to comment
Share on other sites

Primered...

25D4616E-698F-4B58-A04E-691B1D076465-19727DB5B47-DA54-4F4A-B923-879169C6731D-197

Here is a little device I bought off ebay to assist with my spraying projects.

D0C0059F-3DB6-413C-96AF-FF155C033B52-197

Did the sprayer nozzle help at all?

Car looks amazing btw!!!

Link to comment
Share on other sites

Did the sprayer nozzle help at all?Car looks amazing btw!!!

Yeah I think it made it a bit easier... Think it cost about £3.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share





×
×
  • Create New...

Forums


News


Membership