Jump to content
Do Not Sell My Personal Information


Modification Projects/general Modification Discussions


DanGersFord
 Share

Recommended Posts

Hi Ford Fans, please help. I am driving a 1993 Ford Sapphire, 3.0i v6. It is fitted with a Lucas 5am air flow meter. The problem I have is the plug that fitted onto the meter broke, so I just cut it off and attached the wires directly to the connectors of the Air flow with clips, its making contact, but I have a feeling they are not correctly, the throttle pos you adjust for the idle speed is not responding as it did before. There are 5 connectors on the air flow meter. from the left side there are three then a gap and then two. There are many posts in various other forums with the wire color and connector it must connect too, but my wires are completely different.

My wire colors are as follows: Brown with trace Black, Brown with trace Grey, Black and Brown with trace Red.

So, in short, which wire connects to which pin.

Any help would be much appriciated.

Link to comment
Share on other sites


This is a better pic as it shows the true colour of the stripe

IMG-20130307-00158_zpsb91023f7.jpg

Link to comment
Share on other sites

Told you the orange calipers would look great with the black wheels :)

Link to comment
Share on other sites

Told you the orange calipers would look great with the black wheels :)

+1

Id spray the chrome fog surround rings the same colour to continue the theme across the front,

Link to comment
Share on other sites


Whoever the focus guy is, good choice on the orange stripes.

I haven't done much, mostly because of my insurance and mine will probably become a first car for someone.

I have done however, orange stripes kit, never seen my central stripes kit anywhere else (not sure if anyone would want it haha).

Rear tinted windows down to 5% light

6.1" touchscreen JVC unit

DMB gel badges

Fly eyes back lights and reflectors

Ordering a flip key for it tomorrow (locksmith near me can do them apparently :D)

So yeah, thats all i've done, mostly just wanted to say that i'm so glad i'm not the only one with black and orange :).

Link to comment
Share on other sites

Got a hint of orange on the front aswell and black DMB badges with ford wrote in orange

Link to comment
Share on other sites

You should stick the old orange side repeater on aswel to match :P haha

Link to comment
Share on other sites

  • 3 weeks later...

As the snow has decided to give us the weekend off I decided to take the plunge and try to wrap the rear diffuser! After fighting with it for a little while I'm reasonably happy with it.

AD34882B-382D-4D7D-B587-DD915FEC5953-590

  • Like 1
Link to comment
Share on other sites

Cheers Stoney! Just toying with the idea of doing the rear Chrome Handle aswell or not?

Link to comment
Share on other sites


Alittle unsure if it'll look right on back. Was gonna do bonnet strip That one on eBay is a good price! Cheers

Link to comment
Share on other sites

So after wrapping the diffuser decided to have a go at the Chrome Boot Handle.

68D37E39-B731-4554-88B5-DEB22E0FB877-732

And a pic of the 2 together.

B3B29CB2-00D0-4B18-8AA2-3F3653BC3AFA-732

  • Like 2
Link to comment
Share on other sites

Easy to do?

Link to comment
Share on other sites

Easier than the Diffuser! LoL Handle isn't as cuved in different directions as the Diffuser and Bonnet strip!

Link to comment
Share on other sites

I meant do the wrapping in general :)

Link to comment
Share on other sites

I have been thinking about wrapping the rear diffuser on my MK7 Fiesta. Anyone done this? Would be interested in seeing what it would look like.

Link to comment
Share on other sites

were would i buy that carbon wrap from .would like to have a go on mine

yours looks real nice highwaymanuk

Link to comment
Share on other sites

Cheers Guys its easy enough if you got patients! Have a try on something pretty flat to start off. It's the curved stuff that tests you.

I got my vinyl from Underground Graphics on eBay. Really quick and posting it!

  • Like 2
Link to comment
Share on other sites

Not alot was waiting for the warenty to run out but got bored waiting...

J1 automotive Induction kit > makes the Fiesta sound like a monster!

Wind Deflectors

Headlight Brows

and many more mods to come in the future :)

  • Like 1
Link to comment
Share on other sites

Not alot was waiting for the warenty to run out but got bored waiting...

J1 automotive Induction kit > makes the Fiesta sound like a monster!

Wind Deflectors

Headlight Brows

and many more mods to come in the future :)

You'll get plenty of ideas from us lol

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share





×
×
  • Create New...

Forums


News


Membership