hi
ive been very busy today ..
changed my rear speed sensor and hub . to find out . that . its not the sensor ... its the wiring .... there no power at all going into the driver side ABS Loom . but 11v going into the passenger side .... ???? any ideas ????? the only bit of power its getting is 0.05v ???
Cheers
Show
Mk3 Mondeo Abs Problem
Started by MondeoLAD, Feb 02 2013 07:13 PM
2 replies to this topic
#1
MondeoLAD
-
- Members via FB
-
- 11 posts
Member
- Ford Model: mondeo tdci
- Location: Nottinghamshire
Posted 02 February 2013 - 07:13 PM
#2
stef123
Contributor
-
- Management
-
- 3,609 posts
Ford Enthusiast
- Name: Stef
- Gender: Male
- Ford Model: Mondeo ST TDCI
- Year: 2006
- Location: Scotland
-
- Location:Scotland
Contributor
Posted 02 February 2013 - 08:01 PM
Have you checked the wiring and connectors under the car? also have a look at the wiring around the pump too
#3
MondeoLAD
-
- Members via FB
-
- 11 posts
Member
- Ford Model: mondeo tdci
- Location: Nottinghamshire
Posted 02 February 2013 - 08:26 PM
yeh checked the wiring under the rear seats are fine ..... ive got power on the passenger side ... not just on the driver side ??/
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
