• Share Your Car Experience
      Share Your Car Experience
    • 1000's Of Fords For Sale
      1000's Of Fords For Sale
    • Get Your Club gear
      Get Your Club gear
    • Huge Range of Ford Parts
      Huge Range of Ford Parts
    • Savings Up to 15% Off For Members
      Savings Up to 15% Off For Members
    • Join Premium & Save
      Join Premium & Save

AdBlock Warning

Parts of this website do not function properly with AdBlock enabled on your device. To get the best user experience on our website, please disable Adblock for this website (domain) on your browser.


Brakes Problem

Recommended Posts

Hi I have a 2006 lx tdci mondeo

Problem is my brake pedal has a lot of travel I have put pads and discs on front and pads on the back

I have bled the brakes so no air in there but I have found the front passenger side brake is slow to react when the pedal is pressed

So could this be the caliper or the brake line

And help would be great

Thanks a lot


Share this post

Link to post
Share on other sites

agreed, its worth checking that its sufficiently lubricated. I would suggest take some brake cleaner, and spray in there then wipe away the residue, that should get rid of any gunk built up, and then do some brake tests, make sure that you dont have any leaks as you press the pedal to the floor...

Share this post

Link to post
Share on other sites

Well, apparently, winding the piston back in can cause the seals to flip in the master cylinder by forcing the fluid the wrong way. Some says that's a myth, but then, some say it's happened, so make up your own mind.

I found it really difficult to wind the piston in (using an angle grinder spanner), and found it much easier to remove the brake line from the caliper (after putting a hose clamp on the brake line, obviously) - that way you can get the caliper on the bench and wind the piston back in easily as there is no pressure/resistance at all doing it this way.

The approved method is to clamp the brake line, and undo the bleed valve before winding in the piston. But as I said, I find it much easier with the caliper off the car.

Share this post

Link to post
Share on other sites

Hi, there is a tool you can buy, only 2 or 3 pounds, I think from Wilco or similar, its a small cube with pins on each face that fits into the slots in the brake piston, this attaches to a normal socket wrench and makes winding back the piston quick and easy. Because the pins on each face are spaced slightly differently this tool can be used on different types of car. It worked a treat on my mondeo without the need of removing the caliper.


Share this post

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now