No replies to this topic

[Marty1198]

Hi guys. Looking for any suggestions in regards to tail light bulbs I bought. Got these from ebay and although the pins are offset and staggered which is correct for my Focus, they will not turn and lock into the bulb holder because the pins are upside down. By that I mean that the pin nearest the contacts should be higher up the stem of the bulb and the other pin should be lower down. If that makes sense. They slot into the holder in the correct manner but will not turn and lock. I have emailed the seller to arrange returning the bulbs but just wondered if anyone has experienced something similar, or if anyone has adapted bulbs to fit the holder before. 

Attached Thumbnails

•