9 replies to this topic

[ippy]

when you push the windscreen wiper stalk down is it supposed to do a complete wipe of the screen automaticaly or do you have to hold the stalk down??  cos when i push down and let go the wipers stop until i push it again , all other modes are fine, could this be a relay or something?

[Stoney871]

Not a guide so moved to the relevant section.

[artscot79]

it should complete the full sweep so yes it may be the relay you should hear it click on and off

[Stoney871]

Yes. I would reckon that as a first place to investigate.

[ChrisH]

You say all other modes fine... Does the normal timed intermittant wipe work fine, and when on normal wipe when you stop does it switch to intermittant wipe? As said relay first, but it may be a stalk issue if the above work fine..

[ippy]

i'll have a look at the relay and see at w/e (if this poxy rain lets up)   i take it it will be in the fuse box behind the glove box  , or is it in the engine bay

[Stoney871]

The relay is in the glovebox panel.

[ippy]

thanks stoney,   how can i check to see if its working properly cos you cant take em apart?

[Stoney871]

Swap it over with the relay for the rear wiper, they're both the same.

[ippy]

thanks m8 i'l give it a go and see wot happens and let you know