Jump to content


Photo

How Do You Enter Diags On Mk2.5 Focus With Start Button


  • Please log in to reply
3 replies to this topic

#1 rnem_uk

rnem_uk

    Member

  • Budding Enthusiast
  • PipPip
  • 23 posts
  • Name: Rob
  • Ford Model: Focus
  • Year: 2013
  • Location: Berkshire

Posted 26 March 2013 - 11:12 AM

Hi folks,

 

My father-in-laws mk2.5 titanium gave an enginine failure error which has now cleared.  Can you still access that data on the dash display.  I know on the mk2, you could get it by switching to position 3 and holding trip reset.  Is that facility available on his?

 

Cheers, Rob



Have something to contribute?

Sign in or register to start a topic...

Sign up to FOC Premium Membership To Remove These Ads

#2 vince_13

vince_13

    Vince

  • True Ford Enthusiast
  • PipPipPipPip
  • 540 posts
  • Name: Andrew
  • Ford Model: Focus Zetec
  • Year: 2009
  • Location: Staffordshire
Contributor

Posted 26 March 2013 - 11:35 AM

i did the diag test on my mk2.5 fine, follow the instructions in the post below, as for retreiving error codes, i dint know if you can recover the error codes when they have dissapeared

 

http://www.fordowner...et-trick/page-2



#3 rnem_uk

rnem_uk

    Member

  • Budding Enthusiast
  • PipPip
  • 23 posts
  • Name: Rob
  • Ford Model: Focus
  • Year: 2013
  • Location: Berkshire

Posted 26 March 2013 - 03:58 PM

Thanks.... found this buried in the post:

 

On keyless power start.

1)hold trip reset button in.
2)Short press half way down of the power button , displays II position lights.
3)Continue to hold trip reset button.
4)Menu comes up and click trip reset button to scroll through .



#4 vince_13

vince_13

    Vince

  • True Ford Enthusiast
  • PipPipPipPip
  • 540 posts
  • Name: Andrew
  • Ford Model: Focus Zetec
  • Year: 2009
  • Location: Staffordshire
Contributor

Posted 26 March 2013 - 04:33 PM

sorry my mistake only just realised it says "with start button"

 

glad you sorted it




Not what you're looking for?

Register now, we have a huge community of enthusiasts to answer any questions you might have



0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users