david295 Posted March 31, 2013 Share Posted March 31, 2013 Mark 1 2000 2litre. its got 154 thousand on clock I am having my engine taken out on Tuesday to change clutch, (I find it easier to do it that way, also enging is getting blasted to clean it) I am also changing water pump and cam belt + tensioners etc etc. I am just looking for advice on what other parts I can change whilst it is out, oil seals gaskets etc etc. Thanks. 1 Quote Link to comment Share on other sites More sharing options...
Lenny Posted March 31, 2013 Share Posted March 31, 2013 Mark 1 2000 2litre. its got 154 thousand on clock I am having my engine taken out on Tuesday to change clutch, (I find it easier to do it that way, also enging is getting blasted to clean it) I am also changing water pump and cam belt + tensioners etc etc. I am just looking for advice on what other parts I can change whilst it is out, oil seals gaskets etc etc. Thanks. oil pressure sensor is a cheap one to change but difficult to get at when engine is in place,Coolant temp sensor too And Coolant thermostat. Quote Link to comment Share on other sites More sharing options...
Stoney871 Posted March 31, 2013 Share Posted March 31, 2013 Speedo sensor for definite. A known weak spot and also a pig to do while the engine is in the car. 1 Quote Link to comment Share on other sites More sharing options...
david295 Posted March 31, 2013 Author Share Posted March 31, 2013 Thanks, Quote Link to comment Share on other sites More sharing options...
bt_cav Posted March 31, 2013 Share Posted March 31, 2013 maybe renew the gearbox oil while your in about it...... 1 Quote Link to comment Share on other sites More sharing options...
david295 Posted April 1, 2013 Author Share Posted April 1, 2013 The first pic is the slave cylinder i got with clutch kit, the 2nd pic is what all the vids i have whatched have said i need, which is the correct one for a 2litre mk1 2000 1 Quote Link to comment Share on other sites More sharing options...
david295 Posted April 1, 2013 Author Share Posted April 1, 2013 maybe renew the gearbox oil while your in about it...... I did this less than 1000 miles ago 1 Quote Link to comment Share on other sites More sharing options...
Mr Singh Posted April 1, 2013 Share Posted April 1, 2013 you will need the release bearing for an MTX gearbox. i replaced the clutch on my mums old mk1 2.0 focus and we got the wrong release bearing and found its got the same gearbox out of a transit van 1 Quote Link to comment Share on other sites More sharing options...
david295 Posted April 3, 2013 Author Share Posted April 3, 2013 All sorted now, I dropped gear box and engine in one, new clutch and slave cylinder, new water pump, new cam belt, and steamed cleaned engine and box whilst out, and they have come up like new, also steamed cleaned engine bay, it looks like a brand new car under bonnet now, new lower ball joints and new track rod ends, drained and renewed power steering fluid, also new followers. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Ford UK Shop
Sponsored Ad
Name: eBay
Ford Model: FordUK Shop
Ford Year: 2024
Latest Deals
Ford UK Shop for genuine Ford parts & accessoriesDisclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via the club
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.