Jump to content


Show
Photo

Replacing New Rear Discs And New Brake Pads.


  • Please log in to reply
1 reply to this topic

#1 focusal

focusal

    Newbie

  • New Member
  • Pip
  • 1 posts
  • Name: alistair
  • Ford Model: focus
  • Year: 2000
  • Location: Warwickshire

Posted 02 April 2013 - 06:18 PM

Hi im new to this forum,i have owned a ford focus for many years now.I wonder if anyone could help as ive never done this before im going to replace the rear discs and fit new pads is there any special tools i would need  for this job.Thanks.



Have something to contribute?

Sign in or register to start a topic...

Sign up to FOC Premium Membership To Remove These Ads

#2 jeebowhite

jeebowhite

    Resident Loon

  • Super Mod
  • 14,976 posts
  • Name: James
  • Ford Model: Sea Grey Mondeo MKIV 1.8TDCi 140ps Zetec
  • Year: 2007
  • Location: Kent
Contributor

Posted 03 April 2013 - 01:24 PM

for the most part, it should be a case of nothing more than a socket set, wire coat hanger, and a large G Clamp.

 

The only thing I am not sure about, is the drum, I dont know if you have to mount the disk around the drum or the drum around the disk, so dont start this job if your in a hurry, as you might have to leave some head-scratching time...




Not what you're looking for?

Register now, we have a huge community of enthusiasts to answer any questions you might have



0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users