Jump to content
Do Not Sell My Personal Information

What Have You Done With Your Car Today?


bigmunkynutz
 Share

Recommended Posts

Seen this post pop up many times, so thought as this will be the 400'th post, i'd add my bit. Today I have replaced the timing belt, timing belt tensioner & idler wheel, and also replaced the aux belt & tensioner. Fresh antifreeze, front pads and discs and treated her to a new air freshener to complete the job lol. Long day, but feel at ease now.

Link to comment
Share on other sites


Finally got round to fitting my new asian grill after spending the last week and a half painting the inserts (due to work, and not being able to proceed when I should have been able to)

Anyways. I'm happy with the result :)

Grille, after I attach my number plate:

Bearing it's teeth:

After on my fez:

Link to comment
Share on other sites

While I'm here I thought I'd update on my recent purchases and next projects-

£42 instead of £80+ -

post-28494-0-75138200-1380234695_thumb.j post-28494-0-67275300-1380234712_thumb.j post-28494-0-22733400-1380234738_thumb.j

Also to finish off my RS carbon theme inside I've acquired this nice bit of kit-

post-28494-0-51635300-1380234919_thumb.j post-28494-0-33179900-1380234976_thumb.j

Individual bits from Ford = £500ish, my price £90 including the handbrake trim.

I already have a MK2.5 Gear knob surround trim so that bits sorted.

I just need to source the console brackets (£15 and £5 for both) and side trims to go from the front of the console to under the dash (£40 each) and job's a good un'.

Link to comment
Share on other sites

hi just given it a good clean inside & out so I can go to south Wales next week to muck it up. :lol: LOL

Link to comment
Share on other sites


Old tyres were all cracked and made by someone I've never heard of - Southern ?

Just been to have 4 new Avon's fitted. :) :)

Link to comment
Share on other sites

Been for a drive round morecambe bay and Kendal today, nice weather with some country roads. Can't beat it :) first chance to give the new car a good testing.

post-44466-0-37587000-1380404148_thumb.j

Link to comment
Share on other sites

Took a load of garden rubbish, trees and the like, to the tip. Then had to clean both inside and outside and polish.

Link to comment
Share on other sites

added an ST tax disc holder and put an ST key ring on the keys, should be good for a few extra BHP right?

  • Like 3
Link to comment
Share on other sites

Took advantage of the reasonable weather and de-tangoed my 'fez', front, back and sides. Thought I would have trouble with the mirror indicators, but not a prob at all.

Oh, and had the front passenger footwell plastic heater exhaust pipe come away and fall into the footwell for no reason!. I hope its not the shape of things to come........do you think I can get it back on!, not a chance!!

Link to comment
Share on other sites

I have just illuminated my boot popper switch with blue led, to match my headlight and electric window switches :-) bit of a pain to do but I wasn't giving up until I accomplished my mission.

E521815F-4655-4C17-BA64-DB81DBFC8F91-231

Link to comment
Share on other sites

Polished the fez with Auto Glym SRP - might be the last chance I get this year.

Then hoovered it for the 3rd time this week - I hate wet weather.

Also ordered a new rear wiper blade as I found out mine was useless :)

Link to comment
Share on other sites

Todays been a good day - I gave my Fiesta a good hand wash and even decided to tackle the brake dust on the inside of the rims! I had a nice clean car and rims but my arms and legs were covered in brake dust.

I then went and filled up a whole tank with RON 95 instead of 91. It'll be interesting to see if I notice any difference at all, I'm guessing no but we'll see

Link to comment
Share on other sites

:D Booked my car in for remap testing and they're gonna see if the ST up rated intecooler can be fitted :D

Link to comment
Share on other sites


Today was a good day, I took my car and had my wheels done gloss black. Thanks to the guys at the wheel specialist Edinburgh. (Side effect of this however was wandering about shopping all day).

Then, when I got home, literally as I was pulling up, the dhs driver climbed out his van with my heko wind deflectors. Unfortunately when fitting these, I noticed a tiny crack on the passenger side one, so Ive contacted the seller and should get a replacement. I have fitted them ATM anyways, and they look great but the passenger side one especially seems to interfere with the window, and it struggles to go up. I'm hoping once I've left them to bed in for a day or two, that issue will go away. The clips also do not seem to fit in the window channel, has anyone else experienced this?

Link to comment
Share on other sites

I helped a mate fit some Heko on his Kia Sportage last week and the clips were a bit fiddly but will go in in the end.

Sometimes a bit of angling is required.

I used a plastic Bojo tool rather than a screwdriver to push the clips up into the rubbers as it avoids any accidental scratching of paintwork and damaged seals.

Spraying some WD40 into the window channels and leaving the windows closed for 24-48 hours works wonders.

Link to comment
Share on other sites

My hekos interfered with the windows to start.. I had the missus hold the button down and I forced the window all the way up with my hand.. Left it over night and no more problems :) lol I've only got metal chips in the driver side.. I squashed the clips a little then brute forced them in.

Link to comment
Share on other sites

The wind deflectors seem to be bedded in fairly nicely. I've got a newest of clips which are slightly smaller on the way, so hopefully they will fit, and make that slight extra improvement.

Today I hoovered out my car, it was about time it got done, I can't remember the last time I did. I still need to take a couple of things out, like random clothes lying about in the back, which I hate. I also ordered a set of fly eyes in black 1. Opted for the largest 45x150cm sheet, hoping it will be plenty to do my entire car? Will it be enough, or will I need to use it in a certain pattern to get the most out of it?

Link to comment
Share on other sites

QUICK QUESTION / REQUEST!!!!! TITANIUM OR ZETEC MODELS 2013 mk7.5's ONLY!!

Has anyone taken off either of the front door cover and taken pictures of the wiring loom at the top where it all sits, up near the tweeter location!!

OR

Would someone be able to do this for me, i just need good close up and slightly further away pictures of the loom up near where the tweeter would sit in the door card/cover. The loom comes into the door as normal and then comes through the black under panel near the front and towards the top, it doesn't run along to much and there should be a connector plug near where the connector is for the tweeter plug.

Any help would be a GREAT help in solving a mystery!!

Link to comment
Share on other sites

Washed the car after the misses decided to use it she told me she went to work but I think she went rallying what do you think

post-43882-0-02121000-1382120869_thumb.j

post-43882-0-16961600-1382120907_thumb.j

Link to comment
Share on other sites

Car sat at home undrivable!!!

Every time i go out the fan sticks on for ages and you can smell...Burnt rubber or burnt something!!!

PLUS - sidelights keep blowing, and i'm fed up with it!!

Phoned dealers and its been a week.... no ring back!

Link to comment
Share on other sites

Hello

Fitted the ClimAir Sport wind deflectors.

Looking good :)

Gary

Link to comment
Share on other sites

Dropped my car at Collins Performance for remap! Here's hoping for 150-160ps :D

  • Like 1
Link to comment
Share on other sites

Latest Deals

Ford UK Shop for genuine Ford parts & accessories

Disclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via the club

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share







×
×
  • Create New...

Forums


News


Membership