nazsky786 Posted June 6, 2014 Share Posted June 6, 2014 Check the car with xenons for where where the loom comes from Quote Link to comment Share on other sites More sharing options...
ben1191 Posted June 6, 2014 Share Posted June 6, 2014 Ive seen garages offering HID conversion Kits for £250 i think it was,that doesnt seem to expensive too me? Quote Link to comment Share on other sites More sharing options...
Megado Posted June 6, 2014 Share Posted June 6, 2014 Yeap, but I prefer OEM not chinese s**t ;) Quote Link to comment Share on other sites More sharing options...
nazsky786 Posted June 6, 2014 Share Posted June 6, 2014 Them hid conversion kits are not the proper xenon system. Legal xenon system. You will blind people with them. You need to have the correct lens which are projector not halogen reflective. You also need them leveled or you would be the blind one on the road . And then you need them always clean so you get headlight washers. Quote Link to comment Share on other sites More sharing options...
mixmasterlooney Posted June 6, 2014 Share Posted June 6, 2014 The 10 pin loom inside of the engine bay and headlight is not only for HID it is also for AFS there is a slight difference in wiring for the two. The same headlight controll module is used but the "jumper" setup is different. So a car with wiring for HID may actually be wiring for AFS. Same wires Sent from my GT-I9300 using Ford OC mobile app Quote Link to comment Share on other sites More sharing options...
Megado Posted June 11, 2014 Share Posted June 11, 2014 Yes, so i'd looked on schem. I've try to find dash wiring harnesss for xenon but salvage yard don't store them here, don't know why (after all it still valuable for those who built on them self). eBay hasn't to offer also. Quote Link to comment Share on other sites More sharing options...
mixmasterlooney Posted June 11, 2014 Share Posted June 11, 2014 There is an rs loom floating about on eBay for £400 Sent from my GT-I9300 using Ford OC mobile app Quote Link to comment Share on other sites More sharing options...
Megado Posted June 11, 2014 Share Posted June 11, 2014 There is an rs loom floating about on ebay for £400 Sent from my GT-I9300 using Ford OC mobile app Quite expensive, for peace of cables, Here i can almoust get half of car with that price (~500€) All i need is a dash loom, or Xenon part of it. ;) :) Quote Link to comment Share on other sites More sharing options...
mixmasterlooney Posted June 12, 2014 Share Posted June 12, 2014 Yeah it is overpriced but also valuable to people who know what to do with it. Xenon retrofit is a very expensive mod Sent from my GT-I9300 using Ford OC mobile app Quote Link to comment Share on other sites More sharing options...
nazsky786 Posted June 12, 2014 Share Posted June 12, 2014 I just noticed my headlights going up and down . 1 Quote Link to comment Share on other sites More sharing options...
nazsky786 Posted June 12, 2014 Share Posted June 12, 2014 I havnt even plugged in the sensors yet. Havnt even made holes for washers but it looked so good. Lights going up and down. 1 Quote Link to comment Share on other sites More sharing options...
Megado Posted June 13, 2014 Share Posted June 13, 2014 I havnt even plugged in the sensors yet. Havnt even made holes for washers but it looked so good. Lights going up and down. I just noticed my headlights going up and down . What mods you have made? Quote Link to comment Share on other sites More sharing options...
nazsky786 Posted June 13, 2014 Share Posted June 13, 2014 For the headlights the only mods as off yet are the hid module installed, and rear level sensor installed and st headlights. Still need to find the correct front level sensor and install the jets. And get the covers for jets. Almost there really just need some remaining parts and know how to put the jets on, to scared to cut the bumper. Quote Link to comment Share on other sites More sharing options...
Megado Posted June 13, 2014 Share Posted June 13, 2014 For the headlights the only mods as off yet are the hid module installed, and rear level sensor installed and st headlights. Still need to find the correct front level sensor and install the jets. And get the covers for jets. Almost there really just need some remaining parts and know how to put the jets on, to scared to cut the bumper. Nice, have you that wiring setup original or have made rewiring for module? Here some pics for frontsensor Quote Link to comment Share on other sites More sharing options...
nazsky786 Posted June 13, 2014 Share Posted June 13, 2014 I got the wrong one. Turns out it's from a rs not st. I didn't do what you are planning on doing I just completely replace the dashboard loom with rs. Quote Link to comment Share on other sites More sharing options...
mixmasterlooney Posted June 13, 2014 Share Posted June 13, 2014 I got the wrong one. Turns out it's from a rs not st. I didn't do what you are planning on doing I just completely replace the dashboard loom with rs. Rs and st uses the same type, all other model use another type. All to do with suspension setup. Do you mean that your xenons go up and down when you first start the car? Sent from my GT-I9300 using Ford OC mobile app Quote Link to comment Share on other sites More sharing options...
nazsky786 Posted June 13, 2014 Share Posted June 13, 2014 I have the rear one it looks correct the front one looks wrong. Yh when you first start the car. So i know the headlights and the module work now. Now it to install the jets and the sensors. Quote Link to comment Share on other sites More sharing options...
nazsky786 Posted June 13, 2014 Share Posted June 13, 2014 You can see that one sensor looks like it's from another car. And it's missing a bracket. Quote Link to comment Share on other sites More sharing options...
Megado Posted June 13, 2014 Share Posted June 13, 2014 (edited) Normal Car and ST has same setup on front, but RS front suspension has revonukle, it bit different than normal, as far i understand. Front sensor normal/ST Edited June 13, 2014 by Megado 1 Quote Link to comment Share on other sites More sharing options...
nazsky786 Posted June 13, 2014 Share Posted June 13, 2014 That's prob why. I need to find a front st level sensor. Going to get the bolts from Ford unless they are already there. Quote Link to comment Share on other sites More sharing options...
Megado Posted June 13, 2014 Share Posted June 13, 2014 That's prob why. I need to find a front st level sensor. Going to get the bolts from Ford unless they are already there. Why Ford they just same any shop who retail bolt/nuts, Ford has just little FoMoCo extra on price ;) Check for pictures code for frontsensor Quote Link to comment Share on other sites More sharing options...
nazsky786 Posted June 13, 2014 Share Posted June 13, 2014 But solves the headache of trying to find out the size etc etc. I just go down road get bolts and done. Quote Link to comment Share on other sites More sharing options...
Megado Posted June 13, 2014 Share Posted June 13, 2014 Yes indeed does, but all you need to test fit, and measure bolt holes and length, that's i gonna do. Quote Link to comment Share on other sites More sharing options...
mixmasterlooney Posted June 13, 2014 Share Posted June 13, 2014 It's cheap enough from ford and you'll know for sure all fixings for sensors come as a set. The up and down movement at start is self testing. Did you activate it on elm? Probably was already activity in module Sent from my GT-I9300 using Ford OC mobile app Quote Link to comment Share on other sites More sharing options...
nazsky786 Posted June 13, 2014 Share Posted June 13, 2014 I would just get bolts from them, or could just ask them the price and size. But still need to get the front sensor. Can't find it on eBay or anywhee else. Quote Link to comment Share on other sites More sharing options...
.thumb.png.327e57655a9a82472089ef077ae02c11.png)
Recommended Posts
Ford UK Shop
Sponsored Ad
Name: eBay
Ford Model: FordUK Shop
Ford Year: 2024
Latest Deals
Ford UK Shop for genuine Ford parts & accessoriesDisclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via the club
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.