Jump to content


Show
Photo

Access Rear Light Bulbs On Mark 7

lights bulb brake

  • Please log in to reply
6 replies to this topic

#1 robberrabbit

robberrabbit

    Newbie

  • New Member
  • Pip
  • 1 posts
  • Ford Model: s-max
  • Location:
Contributor

Posted 07 June 2013 - 04:46 PM

1. Open boot and remove the 2 screws attaching the light cluster to the back of the car. A small flat blade or a torx 25 screwdriver will do it.

 

2. Inside the boot pull back the side carpet behind the cluster. Starting at the boot-latch end ease out and pull back the carpet all the way to about halfway back towards the rear seat. There are no clips to break it should come out pretty easily

 

3 You now have access to the back of the light cluster. There is a small rectangular hole  there and just inside that you will find a long wingnut. Unscrew and remove

 

4. The cluster can now be eased out. There are no clips to break, just 2 push studs on the outside of the cluster which can be pulled out of the back of the car.

 

5. Before removing it too far disconnect the wiring block at the back so that the cluster becomes free.

 

6. The bulbs are held into the cluster by two clips - press those back and the bulb section can be removed



Have something to contribute?

Sign in or register to start a topic...

Sign up to FOC Premium Membership To Remove These Ads

#2 DanGersFord

DanGersFord

    Dan The Gas Man

  • FOC Supporters
  • 3,498 posts
  • Name: Daniel
  • Ford Model: Fiesta ST3
  • Year: 2014
  • Location: Scotland
Contributor

Posted 07 June 2013 - 04:50 PM

Moved to fiesta guides try and attatch some pictures :)

#3 AdamC11

AdamC11

    Feet Under The Table

  • Budding Enthusiast
  • PipPipPipPip
  • 162 posts
  • Ford Model: Ford Fiesta MK7 in Black

Posted 02 February 2014 - 11:16 AM

Hi,

 

Do you have the link of where this has been moved too?

 

Cheers



#4 iNath

iNath

    ST-2 Mod

  • Super Mod
  • 3,565 posts
  • Name: Nathan
  • Ford Model: Molten Orange Fiesta ST-2
  • Year: 2013
  • Location: Buckinghamshire
Contributor

Posted 02 February 2014 - 11:41 AM

Hi,

 

Do you have the link of where this has been moved too?

 

Cheers

 

Right here :P



#5 AdamC11

AdamC11

    Feet Under The Table

  • Budding Enthusiast
  • PipPipPipPip
  • 162 posts
  • Ford Model: Ford Fiesta MK7 in Black

Posted 12 February 2014 - 03:45 PM

Do you need to remove the wing nut before accessing the rear bulbs?

Cheers

#6 iNath

iNath

    ST-2 Mod

  • Super Mod
  • 3,565 posts
  • Name: Nathan
  • Ford Model: Molten Orange Fiesta ST-2
  • Year: 2013
  • Location: Buckinghamshire
Contributor

Posted 12 February 2014 - 07:28 PM

Do you need to remove the wing nut before accessing the rear bulbs?

Cheers


You sure do.

#7 chrispage1

chrispage1

    Member

  • Budding Enthusiast
  • PipPip
  • 22 posts
  • Name: Chris
  • Ford Model: Fiesta Zetec S
  • Year: 2009
  • Location: Bedfordshire

Posted 15 February 2014 - 10:30 PM

Probably worth adding that not sure there is really any point in having the wing nut on? I took mine off and left them off and they have been fine since.



Have something to contribute?

Sign in or register to start a topic...


Not what you're looking for?

Register now, we have a huge community of enthusiasts to answer any questions you might have




Also tagged with one or more of these keywords: lights, bulb, brake

0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users