Jump to content
Do Not Sell My Personal Information

How Easy Is It To Fit Air Horns?


trikidy
 Share

Recommended Posts

Hello! Looking at this listing on eBay

http://www.ebay.co.uk/itm/180685397925?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649

Seems to be road legal and claims to be easy to install. Has anyone fitted anything like this and if so what do you have to do?

Thanks

"ULTRA LOUD HORNS

12v DUAL TONE AIR HORNS

Very loud pair of 12 volt Air Horns can be fitted to your existing wiring as a direct replacement of your standard horn

Easy mounting using the brackets provided

E1 marked Kit *120DB rating*

Full Wiring instructions supplied

Suitable for Car's Bikes 4x4's Vans Boats

with 12v Supply

Size approx. 90mm Dia with 80mm depth

Link to comment
Share on other sites


I fitted some, when I was going through my boy racer stage. It' was easy enough when I was 17, & involved a relay & a few lengths of wire & connectors. The only issue may be finding the room to fit them.

Link to comment
Share on other sites

Great, were they alot louder?

Link to comment
Share on other sites

Sweet, I will take the plunge :)

Link to comment
Share on other sites


Came today, fitting instructions are so rubbish! Just a confusing picture...

Any advice of where my horn is would help guys

Link to comment
Share on other sites

Done it now, not an easy job!

Had to remove the front left headlight, remove the old one and crimp the power wire to the other one....

Anyway finished now!

Link to comment
Share on other sites

Done it now, not an easy job!

Had to remove the front left headlight, remove the old one and crimp the power wire to the other one....

Anyway finished now!

I bought one also, is it as easy as swapping the cables over?

Link to comment
Share on other sites

Once you gain access to it, simply take the live wire and plug it into the new horn. The new horns need a neg from the other outlet, which you can just wrap around the bolt when you tighten. Then crimp the power so it leads to the other, do the same with the neg.

Must say not as loud as I was expecting!

Link to comment
Share on other sites

Louder than the old one?

Can you video/record it?

Link to comment
Share on other sites

Yeah louder and as it is two horns you can hear both which is pretty good, can do tomorrow

Link to comment
Share on other sites

Sounds more like a MEEP, higher pitched than a low BEEP

Link to comment
Share on other sites

I fitted a pair of horns to mine as one of the OEM horns had stopped working and the other sounded so effeminate no-one took any notice,

They're so easy to do, just a piece of wire with a spade connector on one end and a ring connector on the other, put the spade on the negative terminal and the ring to earth, (Usually the mounting bolt for the horn), then use the positive feed from the old horn on the positive side and fasten to the original horn bracket and your done

Link to comment
Share on other sites

I have to say those eBay dual horns do NOT look like air horns to me despite the wording? - They look like conventional electric snail horns.

Air horns that I used to fit in my younger days had a separate air pump - like this:

http://www.ebay.co.uk/itm/12V-RED-TWIN-2-TONE-AIR-HORNS-KIT-FOR-CAR-BOAT-VAN-TRUCK-LOUD-HORN-TRUMPET-SET-/350801848895?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item51ad6b6a3f

Jim

Link to comment
Share on other sites


Latest Deals

Ford UK Shop for genuine Ford parts & accessories

Disclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via the club

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share






×
×
  • Create New...

Forums


News


Membership