Horn Only Partially Working

[calmcdermott]

Hi all, I haven't been in here for a while.

I'm a little confused with my horn, it does work but only quietly, I had tried a replacement horn itself but it sounds exactly the same and also cleaned the connector with WD40 but still no luck, what could it be?

[sambooka]

Either bad earth or not enough voltage getting to it. Make sure it's earthed to a clean piece of metal ie no rust

[calmcdermott]

Ok thanks I'll have a look tomorrow

[calmcdermott]

FIXED IT!!!!! you're right it was an earthing problem, the supporting metal arm was corroded so I sanded this down and hey presto as good as new.

It's a pain in the backside though, had to remove the passenger wheel, wheel arch lining and water tank so I was able to get to one bolt.

[sambooka]

Happy to help and sometimes I think they make hard so you take it in to get it fixed

[calmcdermott]

Haha valid point, only now got to sort out a clunk from the passenger side wheel, the exhaust clamp banging on the axle, clutch making a clicking noise when setting off, paint liquor flaking and exhaust melting the rear defusor. So not a lot!