RetroCoder Posted April 3, 2009 Share Posted April 3, 2009 I have Mondeo (not the current model but the one before). I think the tube connecting to the rear window washer has become disconnected. I was using it the other day when the water stopped coming out of it (and spraying the glass) but I then noticed water appearing by the offside rear seat belt. I’m assuming the pipe has come off and is pumping water through the bodywork of the car. My question is, how easy is it to remove the external water squirter to see if the pipe is connected ? I don’t want to ram a screw driver under it if it isn’t easy to remove. :( Quote Link to comment Share on other sites More sharing options...
mintalkin Posted April 3, 2009 Share Posted April 3, 2009 on the mk3 next to the rear passenger headrest there is a bit of trim that the seatbelt goes through. Behind the trim there is a push fit connector it sounds like one end has become disconnected. Quote Link to comment Share on other sites More sharing options...
danny2252 Posted April 6, 2009 Share Posted April 6, 2009 yh this is a comon fault this happend on ma dads and you hear of it alot Quote Link to comment Share on other sites More sharing options...
RetroCoder Posted April 20, 2009 Author Share Posted April 20, 2009 on the mk3 next to the rear passenger headrest there is a bit of trim that the seatbelt goes through. Behind the trim there is a push fit connector it sounds like one end has become disconnected. I undid the trim and it was the push connector that had come apart. It's now back together with some added tape. Thanks for you help, this saved me a lot of time :) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.