chrisdesilva6 Posted August 18, 2013 Share Posted August 18, 2013 i have a fiesta 1.4 zetec 3 door 2003, it doesn't have remote locking. however i heard if i replace the GEM module with one with remote locking, the genuine 3 button key will work (once programmed) However after replacing this do i need some sort of receiver for the key buttons to work? Thanks!! Quote Link to comment Share on other sites More sharing options...
Zurrieq Posted September 1, 2013 Share Posted September 1, 2013 Just change the GEM and program the fob key with the GEM and you are good to go. Turn the key from pos 2 to pos 1 for 4 times. The GEM beeps and then press any button on the fob, it should beep back and you are done :) Quote Link to comment Share on other sites More sharing options...
Benzo Posted February 15, 2015 Share Posted February 15, 2015 HI guys. I have a similar question. I have a GEM 2S6T-15k600 what new Gem would go for? I have looked and a little lost. I want the same remote alarm and CL. Quote Link to comment Share on other sites More sharing options...
chrisdesilva6 Posted February 15, 2015 Author Share Posted February 15, 2015 Hi, i changed mine on my previous car last year and it worked! Basically you have to get any GEM module that ends in C(followed by another letter) or D(followed by another letter) E.g. i bought Gem module 4S6T-15K600 DB However if you want an alarm you would have to get one ending in D(x) and buy extra things to make the alarm actually work (I never bothered with that!) Look around on eBay and message car breakers who may have it. Then its a simple case of switching it and getting a Remote Key! :) Quote Link to comment Share on other sites More sharing options...
Zurrieq Posted February 15, 2015 Share Posted February 15, 2015 Agreed :) Since the one you should get either a 2S6T-15k600-Cx or 2S6T-15k600-Dx gem. Then follow my previous post to code the FOB when you fit it :) 1 Quote Link to comment Share on other sites More sharing options...
Benzo Posted February 15, 2015 Share Posted February 15, 2015 Thanks guys that's great advice. I will start adding to basket Sent from my iPhone using Ford OC Quote Link to comment Share on other sites More sharing options...
Benzo Posted February 15, 2015 Share Posted February 15, 2015 Would it matter if it was for a 5 door? I have a 3 door? I found this one http://m.ebay.co.uk/itm/301509903111?_mwBanner=1 Sent from my iPhone using Ford OC Quote Link to comment Share on other sites More sharing options...
chrisdesilva6 Posted February 15, 2015 Author Share Posted February 15, 2015 Would it matter if it was for a 5 door? I have a 3 door? I found this one http://m.ebay.co.uk/itm/301509903111?_mwBanner=1 Sent from my iPhone using Ford OC Quote Link to comment Share on other sites More sharing options...
chrisdesilva6 Posted February 15, 2015 Author Share Posted February 15, 2015 A 5 door GEM module would make your door open light come on in the dash if used on a 3 door car. However i can't see where it says that it's a 5 door version in that eBay ad. Quote Link to comment Share on other sites More sharing options...
Zurrieq Posted February 16, 2015 Share Posted February 16, 2015 I dont recall that there is a difference between a 5d and 3d if there is it would be settings... Sent from my iPhone using Ford OC mobile app Quote Link to comment Share on other sites More sharing options...
Benzo Posted February 16, 2015 Share Posted February 16, 2015 Ok great I'll keep digging. Did you have to disconnect the battery when you installed the GEM. Sent from my iPhone using Ford OC Quote Link to comment Share on other sites More sharing options...
Zurrieq Posted February 16, 2015 Share Posted February 16, 2015 Ideally yes to avoid any problems. Also handle the module with care :) Sent from my iPhone using Ford OC mobile app 1 Quote Link to comment Share on other sites More sharing options...
Benzo Posted February 16, 2015 Share Posted February 16, 2015 Thanks again guys will get one now Sent from my iPhone using Ford OC Quote Link to comment Share on other sites More sharing options...
Benzo Posted March 8, 2015 Share Posted March 8, 2015 Hi guys. So I finally fitted the GEM. All is working as it should so thanks for the help. One question for you tho if you are able to help. The door open icon on the dash seems to stay on when you start the car. Sent from my iPhone using Ford OC Quote Link to comment Share on other sites More sharing options...
Megado Posted September 29, 2015 Share Posted September 29, 2015 Hi it's old topic, but is there difference between engine type on GEM modules? My father bought 2007 1.3liters Fiesta, and he already talk about remote control so it would be easier to handle. Quote Link to comment Share on other sites More sharing options...
filippos Posted November 17, 2019 Share Posted November 17, 2019 i have a ford fiesta mk5. i changed the old gem of my car with a new gem to have the remote control on my key The car locks and unlocks normally but when i have the back door οpen does not light the light of the cabin. αnd shows no open door sign in his car's organs Τhe old numder gem is 4S6T-15K600-BB ant the new is 4S6T-15K600-CB Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.