2013 Fiesta Titanium Or Zetec - Pictures Of Front Door Wiring Loom Needed!

[Torchwood]

QUICK QUESTION / REQUEST!!!!! TITANIUM OR ZETEC MODELS 2013 mk7.5's ONLY!!

Has anyone taken off either of the front door covers and taken pictures of the wiring loom at the top where it all sits, up near the tweeter location!!

OR

Would someone be able to do this for me, i just need good close up's and slightly further away pictures of the loom up near where the tweeter would sit in the door card/cover. The loom comes into the door as normal and then comes through the black under panel near the front and towards the top, it doesn't run along to much and there should be a connector plug near where the connector is for the tweeter plug and where the wires also go for the side mirror, i will put a photo up of the area i am talking about in a bit.

Any help would be very appreciated in solving a mystery!!

[Torchwood]

Ha! Mystery Solved!!!!

I took the door cover off and decided to have a fiddle with a volt/light tester, and found one of the connectors ford did when it was made was a little.....loose! There are manual additions made to the wiring to the mirrors, if you have folding ones - manual additions for the ambient lighting, if you have them and manual additions to the locks, if you have keyless etc etc...

Safe to say i know how all of it wires in now. :P