Simon R Posted November 14, 2013 Share Posted November 14, 2013 Why can't I connect this to my bluetooth in my car phone connect s ok when in phone mode Quote Link to comment Share on other sites More sharing options...
jeebowhite Posted November 14, 2013 Share Posted November 14, 2013 Hi Simon, Have you gone into the settings and configured the OBDII device to be the OBDII chip? Quote Link to comment Share on other sites More sharing options...
Simon R Posted November 15, 2013 Author Share Posted November 15, 2013 On phone or car settings Quote Link to comment Share on other sites More sharing options...
jeebowhite Posted November 15, 2013 Share Posted November 15, 2013 OK so you need to plug the OBDII adapter into the OBDII port next to your knee (when your sat in the car) If you havent already done so, go to Settings, then bluetooth, then scan for devices (on your phone) then pair with the OBDII device (password normally 1234, or 0000. Then on Torque go to menu, then settings, then OBDII on adapter settings. Choose OBDII out of the list. Restart Torque and you should be good to go. Make sure your car is on electrics at least! Quote Link to comment Share on other sites More sharing options...
Preee Posted November 15, 2013 Share Posted November 15, 2013 Simon , you do have a bluetooth OBDii plugged into your car ? , and your not trying to connect Torque Pro via your radio? Quote Link to comment Share on other sites More sharing options...
jeebowhite Posted November 15, 2013 Share Posted November 15, 2013 That too is my thought Preee! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.