.Ryan Posted November 28, 2013 Share Posted November 28, 2013 Hiya guys, Ford never did pick up on the potential here, and left the rear of the Ford Focus Zetec S rather bland in comparison to what they could of done, and what others have done for themselves. I am of course talking about the potential for an ST or RS style exhaust system to fit nicely snug with the Zetec S diffuser: I have been looking around for some options to give me an ST style exhaust setup, but it would look like I would have to buy an expensive custom kit. Also the option of an actual ST exhaust is out of the question due to the presence of a spare wheel. I am wondering what people have had made up for their Zetec S', at what cost, and if they have any pictures they could include that would be great. I am not wanting to spend the earth and in an ideal world I could do with some form of "exhaust tip" being made up, but again I don't know where to start or how to go about this. Any advice, or examples guys? :) Quote Link to comment Share on other sites More sharing options...
Willy Posted November 28, 2013 Share Posted November 28, 2013 My old ZS had a power flow exhaust tip fitted at around £150 If you go to PowerFlows website there is a link to the local garages that supply and fit there products. Http://www.PowerFlowexhausts.co.uk/dealer-locator/ Quote Link to comment Share on other sites More sharing options...
Willy Posted November 28, 2013 Share Posted November 28, 2013 I had the RAiT tip :D Quote Link to comment Share on other sites More sharing options...
higgsy Posted November 28, 2013 Share Posted November 28, 2013 I had the RAiT tip :D I am going for a twin letterbox cat back system but have decided to wait until my old one has rotted in at least one part before I do that as I don't see the point in ditching a perfectly good exhaust. There are a couple of custom exhaust fabricators by me in the west midlands I will be looking at. 1 Quote Link to comment Share on other sites More sharing options...
salsheikh Posted November 28, 2013 Share Posted November 28, 2013 rhino, look at my car - basically consists of a connection in the middle that tees off to 2 single exit trims. i have a set of Milltek exhaust trims in black that need painting that are up for grabs!pm me if your interested current look twin Milltek trims Quote Link to comment Share on other sites More sharing options...
Oliverb Posted November 28, 2013 Share Posted November 28, 2013 how much they going for sal ;) ? Quote Link to comment Share on other sites More sharing options...
salsheikh Posted November 28, 2013 Share Posted November 28, 2013 how much they going for sal ;) ?Make me an offer OliIll post some pics up tomorrow of them Quote Link to comment Share on other sites More sharing options...
Oliverb Posted November 28, 2013 Share Posted November 28, 2013 Make me an offer Oli Ill post some pics up tomorrow of them To be Honest Sal i don't even know how much they are worth .. But i am a bargain hunter ;) Quote Link to comment Share on other sites More sharing options...
Oliverb Posted November 28, 2013 Share Posted November 28, 2013 I am going for a twin letterbox cat back system but have decided to wait until my old one has rotted in at least one part before I do that as I don't see the point in ditching a perfectly good exhaust. There are a couple of custom exhaust fabricators by me in the west midlands I will be looking at. Exactly my plan too !!! 1 Quote Link to comment Share on other sites More sharing options...
salsheikh Posted November 28, 2013 Share Posted November 28, 2013 To be Honest Sal i don't even know how much they are worth .. But i am a bargain hunter ;) You aint the only one....the amount of trouble id be in if the missus found my hoard in the garage:(£45 Delivered? Quote Link to comment Share on other sites More sharing options...
Oliverb Posted November 28, 2013 Share Posted November 28, 2013 You aint the only one....the amount of trouble id be in if the missus found my hoard in the garage:( £45 Delivered? HAHA! Get some pictures for me sal and i will let you know .. not 100% sure on what shape i would like yet... i think i want to fill a fair bit of the ZS diffuser.. Quote Link to comment Share on other sites More sharing options...
salsheikh Posted November 29, 2013 Share Posted November 29, 2013 no worries Oli, will get some pics tonight for you 1 Quote Link to comment Share on other sites More sharing options...
salsheikh Posted November 29, 2013 Share Posted November 29, 2013 pics as you can see the paint needs sanding and repainting. simple job but havent had time to do it Quote Link to comment Share on other sites More sharing options...
higgsy Posted November 29, 2013 Share Posted November 29, 2013 Twin something like this is my plan. http://item.mobileweb.ebay.co.uk/viewitem?itemId=161108603572 Quote Link to comment Share on other sites More sharing options...
ed12 Posted November 30, 2013 Share Posted November 30, 2013 I want a setup like these badboys... http://www.ebay.co.uk/itm/220603555272 Only want the tips, not the full system though. Quote Link to comment Share on other sites More sharing options...
higgsy Posted November 30, 2013 Share Posted November 30, 2013 I want a setup like these badboys... http://www.ebay.co.uk/itm/220603555272 Only want the tips, not the full system though. fundly enough thats prob where I will be going to get my exhaust done. Quote Link to comment Share on other sites More sharing options...
ed12 Posted November 30, 2013 Share Posted November 30, 2013 I'll probably try and find the tips on eBay, then find someone local to chuck it together. They are a bit too far to go for me really :( Quote Link to comment Share on other sites More sharing options...
.Ryan Posted December 1, 2013 Author Share Posted December 1, 2013 If you find the tips and buy a few on eBay, will a local exhaust place put something together? Quote Link to comment Share on other sites More sharing options...
ed12 Posted December 1, 2013 Share Posted December 1, 2013 My brother did that with his Jag, I'll have to ask him where he went. Depends how cheap the tips are I guess, as they will most likely have something if not. Quote Link to comment Share on other sites More sharing options...
.Ryan Posted December 8, 2013 Author Share Posted December 8, 2013 This is the kind of thing I meant ed12, get hold of the tips and try finding somewhere to weld the pipes together etc? Quote Link to comment Share on other sites More sharing options...
ed12 Posted December 8, 2013 Share Posted December 8, 2013 Yeah, I need to get my Zetec S diffuser sorted on a facelift bumper first, then I will look into it properly :) Quote Link to comment Share on other sites More sharing options...
cem1965 Posted August 24, 2017 Share Posted August 24, 2017 Hi Tony Banks in Leeds does all custom exhaust made specialy for your car, i had a RS style cat back system fitted to my zetec s for £449 and it souns fantastic, sorry no pictures though. Quote Link to comment Share on other sites More sharing options...
Phil21185 Posted September 16, 2017 Share Posted September 16, 2017 The NecroPoster strikes again!!! Mwahahahahaaaaaaa!!! 😨😨😨 Good bit of info though 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Ford UK Shop
Sponsored Ad
Name: eBay
Ford Model: FordUK Shop
Ford Year: 2024
Latest Deals
Ford UK Shop for genuine Ford parts & accessoriesDisclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via the club
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.