golfpaul Posted January 21, 2014 Share Posted January 21, 2014 2001 2l 130 euro 3. First off, where is the thermostat located? I thought i was getting used to this engine until someone pointed out it had a part on it that meant it was an 'euro3'... Where would the tstat be located on this, and is there any guides on replacing that are specific to this model? Thanks in advance. Quote Link to comment Share on other sites More sharing options...
jeebowhite Posted January 22, 2014 Share Posted January 22, 2014 Cant say I have seen any guides submitted by members of this forum for replacement... Unfortunately I am not familiar so couldnt advise but hopefully someone can! Quote Link to comment Share on other sites More sharing options...
ppeter7 Posted January 22, 2014 Share Posted January 22, 2014 hi haynes say its just under egr valve at front.the rad top hose go to it hope this helps Quote Link to comment Share on other sites More sharing options...
golfpaul Posted January 23, 2014 Author Share Posted January 23, 2014 Would anyone know a pn for the ford thermostat? On Etis my vechile comes up as Mondeo 2001-2007, 2.0L Duratorq DI CR (130PS). After some very intensive googling, i think ive found a pn of 1096283 - ford didnt want to give me the pn... Quote Link to comment Share on other sites More sharing options...
colinellis Posted January 23, 2014 Share Posted January 23, 2014 Would anyone know a pn for the ford thermostat? On Etis my vechile comes up as Mondeo 2001-2007, 2.0L Duratorq DI CR (130PS). After some very intensive googling, i think ive found a pn of 1096283 - ford didnt want to give me the pn... Hi Paul My 1st post here!! I did one on a 2003 2.0 tdci a few years ago it was at the front of the engine under the egr valve. be aware though there is 2 of them one for the engine and one for the oil cooler or something like that. Any way I digress, I would advise you to get the genuine part from the Stealers as they are a slightly odd shape and the aftermarket ones don't quite fit properly cant remeber the reason why now think it was a little nipple for locating it the correct way round if memory serves correctly. Not too bad a job to do and if you keep the pipes above the engine as soon as you disconnect them you will only have to top up the coolant as opposed to replacing the lot unless that is your intention! The Haynes manual was a great help to me when I did mine. Hope this helps!!! Quote Link to comment Share on other sites More sharing options...
colinellis Posted January 23, 2014 Share Posted January 23, 2014 Paul check out ford wiki there is instructions on there to change the thermostat and oil cooler stat! with piccies Quote Link to comment Share on other sites More sharing options...
stevegtuk Posted January 23, 2014 Share Posted January 23, 2014 As colin said check out http://www.fordwiki.co.uk/index.php?title=Thermostat_replacement thanks to the members of talkford and stdrivers. 1 Quote Link to comment Share on other sites More sharing options...
golfpaul Posted January 25, 2014 Author Share Posted January 25, 2014 Ok, after much googling i eventually found a decent how to for this engine type: http://workshop-manuals.com/ford/mondeo_2001_10.2000-02.2007/mechanical_repairs/3_powertrain/303_engine/303-03_engine_cooling/description_and_operation/diagnosis_and_testing/general_procedures/removal_and_installation/thermostat_2.0l_duratorq-di-tddi_(puma)_diesel-2.0l_duratorq-tdci_(puma)_diesel-2.2l_duratorq-tdci_(puma)_diesel/ Very thorough guide with diagrams. Also, ended up getting this tstat: http://www.ebay.co.uk/itm/BRAND-NEW-THERMOSTAT-MONDEO-TRANSIT-2-0-2-4-DURATORQ-WITH-O-RING-GASKET-/251397357136?pt=UK_CarsParts_Vehicles_CommercialVehicleParts_SM&hash=item3a88733e50 Fits and works well, needle is now bang in the middle after 10 mins driving... Job done! Quote Link to comment Share on other sites More sharing options...
jeebowhite Posted January 27, 2014 Share Posted January 27, 2014 Good Result Paul! Quote Link to comment Share on other sites More sharing options...
MondeoHannah2010 Posted February 22, 2020 Share Posted February 22, 2020 Does anyone know where I could find same thermostat housing as Paul.? Clicked link and couldn't even get part number of ot to Search anywere else but tdci mondeo ford 2010 durotorq 2L diesel (mk4?) Quote Link to comment Share on other sites More sharing options...
MondeoHannah2010 Posted February 25, 2020 Share Posted February 25, 2020 On 1/27/2014 at 10:51 PM, jeebowhite said: Good Result Paul! Hi Paul where can I purchase a thermostat housing please. Tried your link n it didn't work Quote Link to comment Share on other sites More sharing options...
MondeoHannah2010 Posted February 25, 2020 Share Posted February 25, 2020 On 1/26/2014 at 6:10 AM, golfpaul said: Ok, after much googling i eventually found a decent how to for this engine type: http://workshop-manuals.com/ford/mondeo_2001_10.2000-02.2007/mechanical_repairs/3_powertrain/303_engine/303-03_engine_cooling/description_and_operation/diagnosis_and_testing/general_procedures/removal_and_installation/thermostat_2.0l_duratorq-di-tddi_(puma)_diesel-2.0l_duratorq-tdci_(puma)_diesel-2.2l_duratorq-tdci_(puma)_diesel/ Very thorough guide with diagrams. Also, ended up getting this tstat: http://www.ebay.co.uk/itm/BRAND-NEW-THERMOSTAT-MONDEO-TRANSIT-2-0-2-4-DURATORQ-WITH-O-RING-GASKET-/251397357136?pt=UK_CarsParts_Vehicles_CommercialVehicleParts_SM&hash=item3a88733e50 Fits and works well, needle is now bang in the middle after 10 mins driving... Job done! Good Result Paul! Hi Paul where can I purchase a thermostat housing please. Tried your link n it didn't work Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Ford UK Shop
Sponsored Ad
Name: eBay
Ford Model: FordUK Shop
Ford Year: 2024
Latest Deals
Ford UK Shop for genuine Ford parts & accessoriesDisclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via the club
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.