Majic Posted January 22, 2014 Share Posted January 22, 2014 I have a faulty seatbelt in a 2010 Focus that won't allow you to buckle up. There is nothing wrong with the belt, the fault is with the stalk/anchor (button bit) How to I go about replacing this? Do I need to replace the belt as well? I bought a second hand anchor from a breakers yard which comes with a belt attached to it. So do I have to fit the belt as well. Has anyone got a link or some information as to how I go about this. I thought you just had to replace the anchor but now I'm not sure Many Thanks Quote Link to comment Share on other sites More sharing options...
Stoney871 Posted January 25, 2014 Share Posted January 25, 2014 The rear passenger side belt clips into the buckle assembly connected to the centre belt so it sounds like you have the right part as long as you have the full centre belt and not a lap belt. You need to undo the M10 x 35mm screw at the base of the buckle assembly and get access to the mounting points for the belt reel in the seat back. I've added a picture for reference.- 1 Quote Link to comment Share on other sites More sharing options...
Majic Posted January 25, 2014 Author Share Posted January 25, 2014 Thank you very kind of you to help Quote Link to comment Share on other sites More sharing options...
Stoney871 Posted January 25, 2014 Share Posted January 25, 2014 You're welcome anytime Fella. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Ford UK Shop
Sponsored Ad
Name: eBay
Ford Model: FordUK Shop
Ford Year: 2024
Latest Deals
Ford UK Shop for genuine Ford parts & accessoriesDisclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via the club
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.