tippo0151 Posted February 15, 2014 Share Posted February 15, 2014 Is there anyway of putting a focus st exhaust on a 1.4 studio without cutting the wheel well away 1 Quote Link to comment Share on other sites More sharing options...
Lenny Posted February 15, 2014 Share Posted February 15, 2014 Is there anyway of putting a focus st exhaust on a 1.4 studio without cutting the wheel well awayHi,No only option is to fit a duplex exhaust pipe, bends under the tyre well and out the other side, if the split is perfected then equal puffs of steam will exit at same time on both pipes Quote Link to comment Share on other sites More sharing options...
JW1982 Posted February 15, 2014 Share Posted February 15, 2014 It is possible but the ST exhaust must be modified to fit under the wheel well. To do this you have to cut the exhaust tips and weld them back on in a different angle to fit to the bumper. Because the ST exhaust must be mounted at a lower position to fit under the wheel well the exhaust can be seen from the rear which in my opinion does not look nice. In my opinion it would be a lot easier and better looking to make a custom stainless steel dual exhaust system. 1 Quote Link to comment Share on other sites More sharing options...
tippo0151 Posted February 15, 2014 Author Share Posted February 15, 2014 Thanks for the replie lads think will just find a normal exhaust save all the messing hha 1 Quote Link to comment Share on other sites More sharing options...
Lenny Posted February 15, 2014 Share Posted February 15, 2014 It is possible but the ST exhaust must be modified to fit under the wheel well. To do this you have to cut the exhaust tips and weld them back on in a different angle to fit to the bumper. Because the ST exhaust must be mounted at a lower position to fit under the wheel well the exhaust can be seen from the rear which in my opinion does not look nice. In my opinion it would be a lot easier and better looking to make a custom stainless steel dual exhaust system. +1Like this: 1 Quote Link to comment Share on other sites More sharing options...
Lenny Posted February 15, 2014 Share Posted February 15, 2014 Thanks for the replie lads think will just find a normal exhaust save all the messing hhaCheap enough to get a dual exit bult mate around 80-150 pounds depending weather you choose standard or stainless, any exhaust business that has a manderail for bending pipes can do it Quote Link to comment Share on other sites More sharing options...
tippo0151 Posted February 15, 2014 Author Share Posted February 15, 2014 Ye tha looks nice Lenny will get a quote Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.