Jump to content
Do Not Sell My Personal Information


Phone Vent Holder


Monz87
 Share

Recommended Posts

I used to have a cheap phone vent holder on my previous Audi, which has a typical standard air vent.

I can't seem to find one for the s-max. I do see on the addison lee galaxy's they have something plugged into the vent, which holds their radio.

Does anyone know of anything? Really looking for something cheap.

Link to comment
Share on other sites


Thanks, but to be honest, for those prices, i'd rather pay for a cheap suction mount and whack it on the glass on the corner so it doesn't really get in the way, i don't really like them though

Link to comment
Share on other sites

Seriously - you've got £6000+'s worth of S-max but won't pay £30 for a decent Brodit mount?

Link to comment
Share on other sites


Just get the brodit holder tailored for the car then the appropriate sized universal mount which will then hold any phone

Sent from my Nexus 5 using Ford OC mobile app

Link to comment
Share on other sites

Higsy is spot on. That's what undid with mine - bought the Brodit bracket then added a £5 universal holder from my local market.

Link to comment
Share on other sites

I'm a bit tight on funds at the moment that's why. What kind of bracket is it that you put a non brodit holder on the bracket? Any pics?

Link to comment
Share on other sites

Higsy is spot on. That's what undid with mine - bought the Brodit bracket then added a £5 universal holder from my local market.

If I was to putchase this mount:

653865-3.jpg

What kind of cheap holder can I buy for it, I can't even see any screw holes, how do the original holders / cheap holders even fit onto these? I've seen some videos of mounts which have screws but i'm confused with this one.

Link to comment
Share on other sites

Here's a photo of what I have in mine.... you just need to use some self tapping screws onto the brodit plate:

9is2yw.jpg

Link to comment
Share on other sites

But can you show me an example of a holder that would fit like on eBay or something

Sent from my iPhone using Ford OC

Link to comment
Share on other sites

It's not difficult...

Search eBay for universal phone holder or go to your market & find one. All you need is any phone holder that attaches by screws - you put the screws into the Brodit mount - job done.

The airvent ones usually have slide in clips - take these out, slide over screwheads - equally job done.

Link to comment
Share on other sites

It's not difficult...

Search ebay for universal phone holder or go to your market & find one. All you need is any phone holder that attaches by screws - you put the screws into the Brodit mount - job done.

The airvent ones usually have slide in clips - take these out, slide over screwheads - equally job done.

Don't mean to sound dumb, but all the universal holders are either suction cup ones or vent holders, I can't see how I would put screws through the back of them onto the brodit mount...

Link to comment
Share on other sites

Search for Tetrax.

Stick the magnetic mount to the Brodit vent bracket.

Link to comment
Share on other sites

You buy one with the air vent mount - the air vent mounts have little stubs which slot into recesses on the back of the mount.

Find 2 screws with the same size head as the stubs from the vent mount - screw these onto the brodit plate - then slide the mount over them.

It's very easy to see how it works once you receive the mount.

Link to comment
Share on other sites


That makes sense, but as per my picture above, there is no screw holes on the brodit mount?

Link to comment
Share on other sites

You offer the holder up to the mount, mark the position of the holes, make pilot holes on the mount with a small drill bit and then use self-tapping screws.

Our Force uses Brodit mounts for various bits of kit and that's how the fitters do it.

Link to comment
Share on other sites

Really? So even if you bought a brodit mount and holder, you would have to drill holes in it?

Sent from my iPhone using Ford OC

Link to comment
Share on other sites

Yes.

The mounts are designed to be universal so any screw on holder can be fitted.

Link to comment
Share on other sites

Oh I didn't know that, it obviously isn't made of hard plastic then, must be a soft material

Sent from my iPhone using Ford OC

Link to comment
Share on other sites

  • 3 months later...

I have a s-max titanium x with a speaker on top of the dash board the sony cd and bought the Brodit 653865 and it doesn't fit, does anyone know the right clip to buy?

Link to comment
Share on other sites

Buy the side one instead - mounts onto the side of the centre console next to the HVAC controls.

Link to comment
Share on other sites

Yes - that's what I was referring to.

Looks like this:

9is2yw.jpg

Link to comment
Share on other sites

Yes that's the one I ordered, thanks alot.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share




×
×
  • Create New...

Forums


News


Membership