Stoney871 Posted April 25, 2015 Share Posted April 25, 2015 Indeed. Back injuries never go away. Quote Link to comment Share on other sites More sharing options...
JC600 Posted April 26, 2015 Share Posted April 26, 2015 Not good, hope your ok mate. 1 Quote Link to comment Share on other sites More sharing options...
AJRTDDI Posted April 26, 2015 Author Share Posted April 26, 2015 Im in middle of a low amount claim. But they said it dont look good. Even though the forks are faulty. Quote Link to comment Share on other sites More sharing options...
AJRTDDI Posted June 19, 2015 Author Share Posted June 19, 2015 Brakes..mondeo calipers..st170 discs U need Drill hud m12 Spacer.. 15.2mm lengh.. center hole 12mm spacer to perfectly center the carrier. M12 40mm bolts. Everyone says u need 12mm when i machined them to 12mm i noticed carrier are slightly rubbing. 1 Quote Link to comment Share on other sites More sharing options...
AJRTDDI Posted June 19, 2015 Author Share Posted June 19, 2015 Few bits and peices. Ieave st170 stuff till i have full mot. 1 Quote Link to comment Share on other sites More sharing options...
jeebowhite Posted June 19, 2015 Share Posted June 19, 2015 Looking good Quote Link to comment Share on other sites More sharing options...
AJRTDDI Posted June 20, 2015 Author Share Posted June 20, 2015 Cheers guys. All new parts.. only standard part are hubs and they was moded Lol 1 Quote Link to comment Share on other sites More sharing options...
JC600 Posted June 20, 2015 Share Posted June 20, 2015 Getting there mate, wish mine was painted then I could start putting it back together. :) 1 Quote Link to comment Share on other sites More sharing options...
chan1a Posted June 20, 2015 Share Posted June 20, 2015 Looking good :) Sent from my iPhone using Ford OC Quote Link to comment Share on other sites More sharing options...
Preee Posted June 20, 2015 Share Posted June 20, 2015 Wow i wish i could do a project like this, i would not know where to start and i'm sure i would bodge it haha. Looking great so far, keep up the great work. :) 1 Quote Link to comment Share on other sites More sharing options...
AJRTDDI Posted June 24, 2015 Author Share Posted June 24, 2015 Rs skirts and archs next.. 3 Quote Link to comment Share on other sites More sharing options...
AJRTDDI Posted June 27, 2015 Author Share Posted June 27, 2015 Alot more little spot welds into a seam and grind and repeat till smooth. With alittle help of dolly hammer set 4 Quote Link to comment Share on other sites More sharing options...
AJRTDDI Posted July 12, 2015 Author Share Posted July 12, 2015 MOT on monday. Gotta mod rear archs not a big deal. 4 Quote Link to comment Share on other sites More sharing options...
AJRTDDI Posted July 14, 2015 Author Share Posted July 14, 2015 Restore is almost done... Full Mot today on my birthday ST power time :) 1 Quote Link to comment Share on other sites More sharing options...
jeebowhite Posted July 15, 2015 Share Posted July 15, 2015 Looks like a good result mot no advisories. It's fantastic how far you have brought it. Quote Link to comment Share on other sites More sharing options...
Stoney871 Posted July 15, 2015 Share Posted July 15, 2015 Excellent effort that Man. I hope you are suitably proud of your efforts. 1 Quote Link to comment Share on other sites More sharing options...
Preee Posted July 15, 2015 Share Posted July 15, 2015 Looks fantastic and great work , nice one. Quote Link to comment Share on other sites More sharing options...
AJRTDDI Posted July 16, 2015 Author Share Posted July 16, 2015 Finshed. 3 Quote Link to comment Share on other sites More sharing options...
Goodkat Posted July 17, 2015 Share Posted July 17, 2015 Fantastic job right there sir. Enjoy it! Sent via the 'Clacks' GNU STP Quote Link to comment Share on other sites More sharing options...
AJRTDDI Posted July 17, 2015 Author Share Posted July 17, 2015 Cheers goodkat. Im currently pinning out the ST loom. Quote Link to comment Share on other sites More sharing options...
AJRTDDI Posted July 19, 2015 Author Share Posted July 19, 2015 Any ideas moggy. Quote Link to comment Share on other sites More sharing options...
rs moggy Posted July 19, 2015 Share Posted July 19, 2015 easy ant i think that is for the air con presher switch wot is under the drivers side wing on the st think lol did it go to a aircon pipe mate ? Quote Link to comment Share on other sites More sharing options...
AJRTDDI Posted July 19, 2015 Author Share Posted July 19, 2015 Iv removed aircon pressureswitch from ecu. This wire diff. Give us a ring mate. Quote Link to comment Share on other sites More sharing options...
AJRTDDI Posted July 19, 2015 Author Share Posted July 19, 2015 Pin 1 blank Pin 2 gray with white Pin 3 blank Pin 4 black Pin 5 black with orange strip Pin 6 blank Pin 7 white with black strip Pin 8 blank Pin 9 blank Pin 10 blue with red strip Pin 11 blank Pin 12 blank Pin 13 orange with black strip Pin 14 blank Pin 15 blank Pin 16 orange Quote Link to comment Share on other sites More sharing options...
AJRTDDI Posted July 19, 2015 Author Share Posted July 19, 2015 1 wire left. Runs to both 02 sensors on same pins Top right pin when facing. Connector at the top 12v maybe ? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Ford UK Shop
Sponsored Ad
Name: eBay
Ford Model: FordUK Shop
Ford Year: 2024
Latest Deals
Ford UK Shop for genuine Ford parts & accessoriesDisclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via the club
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.