Jump to content
Do Not Sell My Personal Information


My Restoration Project / Build. (Mk4 Escort)


AJRTDDI
 Share

Recommended Posts

Green and yellow on green precat 02

Green and blue on blue pastcat 02

Link to comment
Share on other sites


10 blue + red and 2 gray + red go to oil presher gages but mite go in to can bus !!! so i av asked big woza on lowcost bilders site for the full info on the OBD port plug ok mate il let you no wen he tels me ok

Link to comment
Share on other sites

The colors look like canbus colours. Tbh Thats why i was worried.

They can be removed then and still use dignostic port? I can retro fit my own guages.

Link to comment
Share on other sites

Them colors i have for DLC.

As u can see the colors are wrong.

The think ecu gos into a canbus unit, then diagnostic port is can into the unit.

I do have a matching set of wires. But ecu layout says there for pin 6 and 14

post-48488-143732850342_thumb.jpg

post-48488-14373285357_thumb.jpg

post-48488-14373285604_thumb.jpg

post-48488-143732874969_thumb.jpg

post-48488-143732879191_thumb.jpg

Link to comment
Share on other sites

Last 2 photos match the loom in colour but locost says ecu pinout is different.

Link to comment
Share on other sites


i no mate lets c wot woza says he will post the 7 wires and c wot is wot and the ones for the ECU is wot u need mate soon as i no il bell u ok mate so get that lump in redy lol and get a rs turbo flue tank and pump but i think the efi will work fine mate

Link to comment
Share on other sites

Thats all i have left.

That thick wire is to the coil. Green.

The smaller one is to 02 sensors that im not sure is ground or live ect yet. Yellow

Then thats about it.

post-48488-143732945428_thumb.jpg

post-48488-143732946553_thumb.jpg

post-48488-143732947929_thumb.jpg

Link to comment
Share on other sites

ok mate no probs wen its dun we try it on my car and c if it runs wont take long if its all good then is all dun ok mate sound

Link to comment
Share on other sites

Number 31 and 32 are 02 sensors. Only share pin 1. I think thats not correct.

The picture is from normal 2.0 zetec.

post-48488-143733979529_thumb.jpg

Link to comment
Share on other sites

Loom completed now.

Just waiting on a sump and oil pickup

post-48488-143802768272_thumb.jpg

post-48488-143802769636_thumb.jpg

  • Like 1
Link to comment
Share on other sites

  • 2 weeks later...

ST170.

Also running ST170 manifold and runner unit

post-48488-143925328777_thumb.jpg

  • Like 2
Link to comment
Share on other sites

  • 5 weeks later...

That is awesome, gonna be an eye opener for those on the road! 5.9 seconds... Impressive!

Sent via the 'Clacks'

GNU STP

Link to comment
Share on other sites

When my back injury claim is sorted i may share my secret 400bhp 4x4 mk3 project lol

  • Like 1
Link to comment
Share on other sites

I've just read all 10 pages so I'm now up to date! Haha

Any further updates shall be a notification for me :)

Sent from my HTC One_M8 using Tapatalk

Link to comment
Share on other sites

  • 2 weeks later...
  • 2 months later...

I had just finshed some work on it.

Sadly my car was Stolen yesturday night

Link to comment
Share on other sites

Whaaaatt?!?!?!?!?!?!!?! Oh no :(

Was it insured at this point?..

The scumbags must have spotted you working on it..

Sent from my HTC One_M8 using Tapatalk

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share





×
×
  • Create New...

Forums


News


Membership