Jump to content


Photo

My Restoration Project / Build. (Mk4 Escort)


  • Please log in to reply
84 replies to this topic

#76 AJRTDDI

AJRTDDI

    Feet Under The Table

  • Budding Enthusiast
  • PipPipPipPip
  • 433 posts
  • Name: antony
  • Ford Model: 1.8 TDDi
  • Year: 2000
  • Location: West Midlands

Posted 19 July 2015 - 05:40 PM

Green and yellow on green precat 02
Green and blue on blue pastcat 02

Have something to contribute?

Sign in or register to start a topic...



Sign up to FOC Premium Membership To Remove These Ads

#77 rs moggy

rs moggy

    Newbie

  • Budding Enthusiast
  • Pip
  • 7 posts
  • Name: nathan
  • Ford Model: escort mk3
  • Year: 1985
  • Location: West Midlands

Posted 19 July 2015 - 05:55 PM

10 blue + red and 2 gray + red go to oil presher gages but mite go in to can bus !!! so i av asked big woza on lowcost bilders site for the full info on the OBD port plug ok mate il let you no wen he tels me ok



#78 AJRTDDI

AJRTDDI

    Feet Under The Table

  • Budding Enthusiast
  • PipPipPipPip
  • 433 posts
  • Name: antony
  • Ford Model: 1.8 TDDi
  • Year: 2000
  • Location: West Midlands

Posted 19 July 2015 - 06:02 PM

The colors look like canbus colours. Tbh Thats why i was worried.

They can be removed then and still use dignostic port? I can retro fit my own guages.

#79 AJRTDDI

AJRTDDI

    Feet Under The Table

  • Budding Enthusiast
  • PipPipPipPip
  • 433 posts
  • Name: antony
  • Ford Model: 1.8 TDDi
  • Year: 2000
  • Location: West Midlands

Posted 19 July 2015 - 06:09 PM

Them colors i have for DLC.

As u can see the colors are wrong.

The think ecu gos into a canbus unit, then diagnostic port is can into the unit.


I do have a matching set of wires. But ecu layout says there for pin 6 and 14

Attached Thumbnails

  • 1437328501905.jpg
  • 1437328534484.jpg
  • 1437328559167.jpg
  • 1437328748609.jpg
  • 1437328788835.jpg


#80 AJRTDDI

AJRTDDI

    Feet Under The Table

  • Budding Enthusiast
  • PipPipPipPip
  • 433 posts
  • Name: antony
  • Ford Model: 1.8 TDDi
  • Year: 2000
  • Location: West Midlands

Posted 19 July 2015 - 06:11 PM

Last 2 photos match the loom in colour but locost says ecu pinout is different.

#81 rs moggy

rs moggy

    Newbie

  • Budding Enthusiast
  • Pip
  • 7 posts
  • Name: nathan
  • Ford Model: escort mk3
  • Year: 1985
  • Location: West Midlands

Posted 19 July 2015 - 06:16 PM

i no mate lets c wot woza says he will post the 7 wires and c wot is wot and the ones for the ECU is wot u need mate soon as i no il bell u ok mate so get that lump in redy lol and get a rs turbo flue tank and pump but i think the efi will work fine mate



#82 AJRTDDI

AJRTDDI

    Feet Under The Table

  • Budding Enthusiast
  • PipPipPipPip
  • 433 posts
  • Name: antony
  • Ford Model: 1.8 TDDi
  • Year: 2000
  • Location: West Midlands

Posted 19 July 2015 - 06:22 PM

Thats all i have left.

That thick wire is to the coil. Green.

The smaller one is to 02 sensors that im not sure is ground or live ect yet. Yellow

Then thats about it.

Attached Thumbnails

  • 1437329452864.jpg
  • 1437329464053.jpg
  • 1437329477849.jpg


#83 rs moggy

rs moggy

    Newbie

  • Budding Enthusiast
  • Pip
  • 7 posts
  • Name: nathan
  • Ford Model: escort mk3
  • Year: 1985
  • Location: West Midlands

Posted 19 July 2015 - 06:27 PM

ok mate no probs wen its dun we try it on my car and c if it runs wont take long if its all good then is all dun ok mate sound



#84 AJRTDDI

AJRTDDI

    Feet Under The Table

  • Budding Enthusiast
  • PipPipPipPip
  • 433 posts
  • Name: antony
  • Ford Model: 1.8 TDDi
  • Year: 2000
  • Location: West Midlands

Posted 19 July 2015 - 09:15 PM

Number 31 and 32 are 02 sensors. Only share pin 1. I think thats not correct.

The picture is from normal 2.0 zetec.

Attached Thumbnails

  • 1437339793954.jpg


#85 AJRTDDI

AJRTDDI

    Feet Under The Table

  • Budding Enthusiast
  • PipPipPipPip
  • 433 posts
  • Name: antony
  • Ford Model: 1.8 TDDi
  • Year: 2000
  • Location: West Midlands

Posted Yesterday, 08:18 PM

Loom completed now.

Just waiting on a sump and oil pickup

Attached Thumbnails

  • 1438027681033.jpg
  • 1438027694690.jpg


Have something to contribute?

Sign in or register to start a topic...


Not what you're looking for?

Register now, we have a huge community of enthusiasts to answer any questions you might have



0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users