Drramore Posted June 18, 2014 Share Posted June 18, 2014 Hi All, My engine management light came on and gives an error code for the lambda sensor. I've never replaced one before, though it looks pretty straightforward online - the one question I have is what type to replace it with. eBay lists lambda sensors for a Mk1 ford focus starting at £15. The guides I've seen tell me that you must replace the sensor with the same type that you removed; else the onboard computer will hate you and cause trouble. Looking at a ford parts website the sensors sell for well over £100. Anyone with any advice on which type of sensor to replace my current one with? On that note - anyone with advice on how to tell what make my current sensor is? Cheers, Dr Quote Link to comment Share on other sites More sharing options...
nazsky786 Posted June 19, 2014 Share Posted June 19, 2014 Ok. First you need to tell us the code fully. You mush have been told bank 1 sensor 1 or something like that. Once you know which sensor it is, it should have a coloured connector. Green or blue. You need to replace the sensor for the same colour. And make sure you get oem quality or original Ford. Replacing the sensor is easy make sure the vehicle is cold and not started. You might choose to use wd 40 if the sensor Is stuck. Using a spanner or the special tool remove the old and replace with new. Use copper grease as well on the treads but don't touch the sensor tip. Quote Link to comment Share on other sites More sharing options...
stef123 Posted June 19, 2014 Share Posted June 19, 2014 Don't buy a cheap one is my only advice.. 1 Quote Link to comment Share on other sites More sharing options...
nazsky786 Posted June 19, 2014 Share Posted June 19, 2014 Yh. Very good advice. Cheap is not better. Quote Link to comment Share on other sites More sharing options...
Drramore Posted June 20, 2014 Author Share Posted June 20, 2014 Thanks chaps, that's really great to get this info so quickly. As it happens, I've gotten an OBD2 scanner and can tell you the code: P0420 On an aside, I've got the option of a few ford focus models when I connect the scanner; none of them is the petrol 1.8 zetec. Anyone with advice on the most suitable option to choose instead? Focus 1.6i Focus VCT 1.6i Focus CMAX VCT 1.6i Focus CMAX 1.6i Focus Ghia 1.6i Anyway, the 0420 code seems to mean that my CAT efficiency has decreased. I'm therefore not convinced that changing the O2 sensor would help. Options for me seem to be to either clean the CAT or to replace it. I think I'll go for the cleaning option first, then the replacement if nothing helps. I understand that the CAT doesn't normally fail, and even though my car is now 12 years old it's only done 74k miles. I think that there may be an upstream problem. A week ago my car didn't start first time after I'd made a short trip and left the car for a few mins... It started fine on second attempt. This happened a couple of times in the same day. I thought perhaps the sparkplugs had fouled or the fuel pump had a problem. The problem with the CAT makes me think that it's occurred secondary to the sparkplugs. Any ideas? My plan is to take it to the garage on Monday to get a checkup; then I'll have a better idea of the location of the problem. If there's anyone that'd spotted the heart of the issue from what I've said, I'd be grateful of your advice. Cheers, Dr Quote Link to comment Share on other sites More sharing options...
nazsky786 Posted June 20, 2014 Share Posted June 20, 2014 For a car that is low mileage and 12 years old says it's not been driven often and so I would suggest a tune up. Quote Link to comment Share on other sites More sharing options...
stef123 Posted June 20, 2014 Share Posted June 20, 2014 A p0420 code doesn't strictly mean your cat is at fault.. Quote Link to comment Share on other sites More sharing options...
Alex Simov Posted August 12, 2015 Share Posted August 12, 2015 Did you manage to solve the problem? Quote Link to comment Share on other sites More sharing options...
grill Posted May 17, 2016 Share Posted May 17, 2016 UP! I captured a live data of oxygen sensor and can't understand what is bank1, bank2 and sensor1, sensor2. Video please finde here: Are bought sensors working? I will wait yours comments. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Ford UK Shop
Sponsored Ad
Name: eBay
Ford Model: FordUK Shop
Ford Year: 2024
Latest Deals
Ford UK Shop for genuine Ford parts & accessoriesDisclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via the club
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.