kevinhut Posted August 6, 2014 Share Posted August 6, 2014 Hi I have a 2005 ford fiesta 1.6 petrol my warning light has come on and I have checked its coming up as: P0030 H025 heater control Circuit Bank 1 Sensor 1 I also have freeze frames if theywould help. does this mean I need a new sensor? And if so where is it located? I have googled it and cant seam to find the correct diagram. Can anyone tell me if this is the correct one? http://www.eurocarparts.com/mobile/ecp/c/Ford_Fiesta_1.6_2005/p/car-parts/car-body-parts-and-car-exhaust/exhausts/lambda-sensor/?710590181&1&3d4189d0854feadc145880d2538e50d957e636d6&000210 Thanks for any help Quote Link to comment Share on other sites More sharing options...
gampla Posted August 6, 2014 Share Posted August 6, 2014 there is two the one it could be is top which is on the manifold under the plastic pipes Quote Link to comment Share on other sites More sharing options...
gampla Posted August 6, 2014 Share Posted August 6, 2014 should be somewhere in the red ring Quote Link to comment Share on other sites More sharing options...
kevinhut Posted August 6, 2014 Author Share Posted August 6, 2014 Many thanks for the replys, does anyone know if the one ive linked is correct? Quote Link to comment Share on other sites More sharing options...
gampla Posted August 6, 2014 Share Posted August 6, 2014 Many thanks for the replys, does anyone know if the one ive linked is correct? ngk show the front to have a green connector i cant tell if haas parts are good as ive alway gone for mid range Quote Link to comment Share on other sites More sharing options...
stef123 Posted August 6, 2014 Share Posted August 6, 2014 should be somewhere in the red ringUmm, no that's the inlet manifold. Bank one sensor one will be pre cat sensor Quote Link to comment Share on other sites More sharing options...
kevinhut Posted August 6, 2014 Author Share Posted August 6, 2014 Thanks and where would I find it? Dont have a manual and cant seam to find a diagram online. Quote Link to comment Share on other sites More sharing options...
gampla Posted August 6, 2014 Share Posted August 6, 2014 Umm, no that's the inlet manifold. Bank one sensor one will be pre cat sensor if you bare with me ill take a few pics of mine Quote Link to comment Share on other sites More sharing options...
gampla Posted August 6, 2014 Share Posted August 6, 2014 ive attached 3 pics of what you need to look out for take air box off and follow these Quote Link to comment Share on other sites More sharing options...
kevinhut Posted August 6, 2014 Author Share Posted August 6, 2014 Many thanks will look tomorrow Quote Link to comment Share on other sites More sharing options...
gampla Posted August 6, 2014 Share Posted August 6, 2014 Many thanks will look tomorrow i think you need to torq it to 47nm you will also need a lambda sensor socket Quote Link to comment Share on other sites More sharing options...
kevinhut Posted August 6, 2014 Author Share Posted August 6, 2014 Got the socket coming tomorrow, what do u mean torq to 47mm? Quote Link to comment Share on other sites More sharing options...
gampla Posted August 6, 2014 Share Posted August 6, 2014 the lambda sensor needs to be torq to 47nm or 35 lbf ft Quote Link to comment Share on other sites More sharing options...
kevinhut Posted August 6, 2014 Author Share Posted August 6, 2014 Ok thanks Quote Link to comment Share on other sites More sharing options...
gampla Posted August 6, 2014 Share Posted August 6, 2014 Ok thanks if you still get the same problem its the bottom one and its a !Removed! to get to without dropping half of the engine Quote Link to comment Share on other sites More sharing options...
kevinhut Posted August 6, 2014 Author Share Posted August 6, 2014 Can I not get to it from underneath the car? Quote Link to comment Share on other sites More sharing options...
gampla Posted August 6, 2014 Share Posted August 6, 2014 Can I not get to it from underneath the car? not with out a ramp Quote Link to comment Share on other sites More sharing options...
kevinhut Posted August 6, 2014 Author Share Posted August 6, 2014 Ok cool thanks Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Ford UK Shop
Sponsored Ad
Name: eBay
Ford Model: FordUK Shop
Ford Year: 2024
Latest Deals
Ford UK Shop for genuine Ford parts & accessoriesDisclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via the club
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.