Show
Blower switch
Started by FocusTDDI, Jun 17 2009 10:42 PM
5 replies to this topic
#1
FocusTDDI
-
- Members
-
- 22 posts
Member
- Gender: Male
- Ford Model: Focus 1.8 CL TDDI
Posted 17 June 2009 - 10:42 PM
Hope someone can help with this. The blower in my 01 focus tddi only operates on the number 4 setting. Works fine except it's going to be either red hot or stone cold. Any help would be really appreciated
#2
fiesta_lad
-
- Members
-
- 1,189 posts
Area Rep: Northwest
- Gender: Male
- Ford Model: fiesta mk5
- Location:
-
Posted 17 June 2009 - 10:55 PM
Hope someone can help with this. The blower in my 01 focus tddi only operates on the number 4 setting. Works fine except it's going to be either red hot or stone cold. Any help would be really appreciated
This could be a heater fan resister,
#3
w2575
-
- Members
-
- 33 posts
Settling In Well
- Ford Model: Focus mk2
- Location:
Posted 18 June 2009 - 05:34 AM
Agreed ! New rotory switch !
#4
FocusTDDI
-
- Members
-
- 22 posts
Member
- Gender: Male
- Ford Model: Focus 1.8 CL TDDI
Posted 18 June 2009 - 02:48 PM
Great, thanks for that, I'll get right on it.
#5
mintalkin
-
- Members
-
- 3,321 posts
Ford Enthusiast
- Name: mintalkin
- Gender: Male
- Ford Model: mondeo tdci 130
- Year: 2006
- Location: Staffordshire
-
Posted 18 June 2009 - 02:55 PM
new resistor pack required
#6
Whelk8891
-
- Members
-
- 95 posts
Settling In Well
- Ford Model: Focus Mk1 Saloon 1.8 TDDi
- Location:
Posted 18 June 2009 - 08:06 PM
Thermal resistor - Its NOT in the switch, its a separate part!
Remove the glove box, and you'll see it on the right, behind the blower motor housing. Held in place with one screw and a multiplug attached. Dead easy to replace, about £13 for the part from Ford.
Remove the glove box, and you'll see it on the right, behind the blower motor housing. Held in place with one screw and a multiplug attached. Dead easy to replace, about £13 for the part from Ford.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
