blue crush Posted September 21, 2014 Share Posted September 21, 2014 Anyone fitted the geniune ford ipod holder to their focus armrest console without one from stock? I ordered one and fitted but seems to prevent the cig lighter cover from opening. Can anyone advise fitting on my zetec model as no instructions. Sent from my iPhone using Ford OC 2 Quote Link to comment Share on other sites More sharing options...
GingerFlame Posted September 21, 2014 Share Posted September 21, 2014 Can you post some images? :) 1 Quote Link to comment Share on other sites More sharing options...
blue crush Posted September 22, 2014 Author Share Posted September 22, 2014 Hope this works: Sent from my iPhone using Ford OC 2 Quote Link to comment Share on other sites More sharing options...
GingerFlame Posted September 22, 2014 Share Posted September 22, 2014 All I can think to do is take it out, remove the 12v cover and reinstall it. Or, you could install a multiport splitter, one that plugs in and has a short cable, then reinstall the holder :) 1 Quote Link to comment Share on other sites More sharing options...
Stoney871 Posted September 22, 2014 Share Posted September 22, 2014 I think you may have to trim the bottom of the holder slightly or remove the socket cover. Is the holder flush against the back of the unit? 1 Quote Link to comment Share on other sites More sharing options...
blue crush Posted September 22, 2014 Author Share Posted September 22, 2014 I was thinking exactly those options. It does seem to sit flush on the back which was confusing me to why it doesnt sit right. Wondering if the consoles with the ipod holder built in them have some other part that makes it sit perfect which i am missing? The other flaw ive found as i brought it to sit my iPhone in while it is charging.. The lid doesnt shut down as iPhone is too high. Sent from my iPhone using Ford OC 1 Quote Link to comment Share on other sites More sharing options...
Stoney871 Posted September 22, 2014 Share Posted September 22, 2014 I believe the holder was designed for an ipod classic rather than phones so that's most likely the problem. 2 Quote Link to comment Share on other sites More sharing options...
blue crush Posted September 23, 2014 Author Share Posted September 23, 2014 Yeh that is probably true about the ipod classic. Does anyone here work for ford who can get me a breakdown diagram of the armrest console so that i can see how it all goes together? Sent from my iPhone using Ford OC 1 Quote Link to comment Share on other sites More sharing options...
Gaz RS Posted September 23, 2014 Share Posted September 23, 2014 You need to remove the back of the armrest then cut some holes for the securing tabs usb and AUX ports on the ipod holder to go through, there's a faint line molded into the plastic 1 Quote Link to comment Share on other sites More sharing options...
Stoney871 Posted September 23, 2014 Share Posted September 23, 2014 I have Microcat but tbh it only shows an exploded parts layout so no fine details on assembly. I'll get the pic up for you later though. 2 Quote Link to comment Share on other sites More sharing options...
blue crush Posted September 23, 2014 Author Share Posted September 23, 2014 Gaz mate, cheers for that! I didnt realise i could undo back cover for access and was racking my brains out trying to figure how to get usb in and remove cover off cig lighter lol. Stoney871, if you could get the diagrams up.. Would defo help. I appreciate it. Sent from my iPhone using Ford OC 1 Quote Link to comment Share on other sites More sharing options...
Stoney871 Posted September 23, 2014 Share Posted September 23, 2014 The back cover is easy. Two screws at the top under the hinge area and pull the cover back and up to release. Picture to follow, not sure if it will be of great use but see how you go. 1 Quote Link to comment Share on other sites More sharing options...
Stoney871 Posted September 23, 2014 Share Posted September 23, 2014 1 Quote Link to comment Share on other sites More sharing options...
blue crush Posted September 23, 2014 Author Share Posted September 23, 2014 Thanks stoney. I can kinda see how it all goes together now from that diagram. Going to give it a go with back cover tomorrow and everything. big thanks for the help from everybody! Sent from my iPhone using Ford OC 1 Quote Link to comment Share on other sites More sharing options...
Stoney871 Posted September 23, 2014 Share Posted September 23, 2014 You're welcome. Let us know how you get on. 1 Quote Link to comment Share on other sites More sharing options...
blue crush Posted September 25, 2014 Author Share Posted September 25, 2014 After stripping the back cover and seeing what gazRs and stoney posted in assistance (highly appreciated) i finally discovered why it wasn't sitting flush. I removed a part from behind the holder sticking out preventing flush, with a solder iron as only plastic welded on. This is the part: Now a happy result: Have a plan to revert back to plastic welding part on again and installing usb and aux if i struggle to get what im after with a mod with custom dual usb socket Sent from my iPhone using Ford OC 1 Quote Link to comment Share on other sites More sharing options...
Stoney871 Posted September 25, 2014 Share Posted September 25, 2014 Excellent result. I guess that bracket is where the oem usb/aux clips in. 1 Quote Link to comment Share on other sites More sharing options...
Stoney871 Posted September 27, 2014 Share Posted September 27, 2014 Something you may find of interest- http://www.ford-focus.dk/Forum/e107_plugins/forum/forum_viewtopic.php?42141 2 Quote Link to comment Share on other sites More sharing options...
blue crush Posted September 27, 2014 Author Share Posted September 27, 2014 Brillant guide there stoney. Used google to translate Sent from my iPhone using Ford OC 2 Quote Link to comment Share on other sites More sharing options...
Stoney871 Posted September 27, 2014 Share Posted September 27, 2014 Thought you'd find it relevant. 1 Quote Link to comment Share on other sites More sharing options...
Hassen Posted September 27, 2014 Share Posted September 27, 2014 Welcome to the forums Matt :) 1 Quote Link to comment Share on other sites More sharing options...
yunii Posted September 20, 2016 Share Posted September 20, 2016 I may do this mod as well Sent from my SM-G925F using Tapatalk Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Ford UK Shop
Sponsored Ad
Name: eBay
Ford Model: FordUK Shop
Ford Year: 2024
Latest Deals
Ford UK Shop for genuine Ford parts & accessoriesDisclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via the club
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.